Difference between revisions of "Diesel Engine"

From c34.org
Jump to navigation Jump to search
 
(217 intermediate revisions by 10 users not shown)
Line 1: Line 1:
''The Catalina 34 has had at least three different motors.  The M25, a 21hp engine, was installed on the the early models.  The M25XP (23 hp) became standard in 1988. The M30, a 4 cylinder producing 28hp, became an optional engine about the same time and is standard in the Mark II.  All are produced under the Universal Motors brand (now Westerbeke Corporation).  Due to lack of available supplies, the factory occasionally installed a Yanmar engine (note: Yanmars are higher-compression engines, which do not require glow plugs). ''
+
''The Catalina 34 has had at least three different engines.  The
 +
* M-25, a 3-cyl, 21 hp engine, was installed on the the early models.   
 +
* M-25XP (3-cyl, 23 hp) became standard in 1988.  
 +
* M-30, a 4-cylinder producing 28hp, became an optional engine about the same time and is standard in the Mark II.   
 +
 
 +
All are produced under the Universal Motors brand (now Westerbeke Corporation).  Due to lack of available supplies, the factory occasionally installed a Yanmar engine (note: Yanmars are higher-compression engines, which do not require glow plugs). ''
 +
 
 +
== Operators, Parts, Service Manuals AND Factory Service Bulletins AND Transmision Manuals ==
 +
*[http://www.c34.org/wiki/index.php?title=Manuals Engine and Transmission Manuals and Universal Factory Service Bulletins] <br>
 +
 
 +
== General ==
 +
 
 +
CRITICAL UPGRADES  includes a lot of engine information:  Critical Upgrades  http://c34.org/bbs/index.php/topic,5078.0.html
 +
 
 +
[http://realitycheck.me/resources.htm RESOURCES - good M25 engine information,from a C36 owner]
 +
 
 +
Spares for a Long Cruise
 +
 
 +
http://c34.org/bbs/index.php/topic,4590.0.html
 +
 
 +
Bleeding 101    http://c34.org/bbs/index.php/topic,6377.0.html
  
 
== Cooling ==
 
== Cooling ==
*[[Exhaust Pipe Replacement|Exhaust pipe replacement]]<br>
+
*[[ONE PROCEDURE TO FLUSH the ENGINE CLOSED COOLANT SYSTEM - from RC's (aka Mainesail aka Rod Collins aka Compass Marine)]] <small>-- </small>
 +
 
 +
*[[Replacement part numbers for the engine coolant circulation pump on the M-25, M-25XP, M-25XPA, M-35, M-35A]] '''  /  Note: This is NOT for the newer B-series engines''' --<small>KWKloeber 7/14/2019</small><br>
 +
*[[Flow directions in engine cooling hoses (both early and B-series engines)]] --<small>KWKloeber 2/2/2019</small>
 +
*[[Why do some of our engines have different Oberdorfer sea water pumps than others, and what about that cir-clip "holding on the impeller"? ]]  <small>-- KWKloeber 15 May 2015</small>
 +
The first part pertains more to C30's with M-25s/Oberdorfer pumps, than to M-25XPs -- but it's interesting background anyway....
 +
The second part pertains to all those with Ob pumps, and is subtitled "''Yes, you're right ...but we don't tell customers that''."
 +
<small>-- KWKloeber 15 May 2015</small>
 +
*Why SHERWOOD Raw Water Pumps leave a LOT to be desired:  See reply #7 here:  http://c34.org/bbs/index.php/topic,8493.0.html
 +
Thanks to Ken for that one, I'm tired of repeating it. - Stu  5/25/2015
 
*[[Heat Exchanger Maintenance|Heat exchanger maintenance, including zinc change]]<br>
 
*[[Heat Exchanger Maintenance|Heat exchanger maintenance, including zinc change]]<br>
 
*[[Overheating Due to Heat Exchanger|Heat exchanger upgrade]] to 3" version to prevent overheating<br>
 
*[[Overheating Due to Heat Exchanger|Heat exchanger upgrade]] to 3" version to prevent overheating<br>
*[[Hump Hose Replacement|Hump hose replacement guidance]]<br>
 
 
*[[Engine Air Lock - Engine Heating Problem|Overheating as a result of an air lock]]<br>
 
*[[Engine Air Lock - Engine Heating Problem|Overheating as a result of an air lock]]<br>
*[[Raw water pump and cooling system]] ''(Just a little info here; so, please add your own more comprehensive overview and maintenance article here)''
+
*[[Raw water pump, impellers and cooling system]] ''(Ron Hill's May 2002 Mainsheet article on Rebuilding an Oberdorfer water pump)''
 
*[[Raw Water Pump Priming Problem|Raw water pump:]] Loss of self-priming capability<br>
 
*[[Raw Water Pump Priming Problem|Raw water pump:]] Loss of self-priming capability<br>
 
*[[Water Heater Doesn't Heat|Water heater doesn't heat when motoring]]<br>
 
*[[Water Heater Doesn't Heat|Water heater doesn't heat when motoring]]<br>
*[[Muffler Replacement or Repair|Water-lift muffler: Repair or replace?]]<br>
+
*[[3" heat exchanger mounts]]
 +
*[[Water Pump Impellers]]
 +
*[[Heat Exchanger Pictures]]
 +
*[[Replacing a Sherwood Water Pump with an Oberdorfer]]
 +
*  Rebuilding an OBERDORFER Raw Water Pump with Flix includes MODEL numbers for the Oberdorfer replacement pumps, see reply #12:  http://c34.org/bbs/index.php/topic,6766.0.html
 +
* HEAT EXCHANGER SOURCES and Replacement Bracket and Exchanger with Pictures  http://c34.org/bbs/index.php/topic,6920.0.html
 +
* COOLANT PUMP PARTS RESOURCE  http://forums.catalina.sailboatowners.com/showthread.php?t=169680
 +
* FRESHWATER COOLANT PUMP Parts # and Sources  http://c34.org/bbs/index.php/topic,8939.0.html
 +
* [http://c34.org/bbs/index.php/topic,9461.msg77379.html#msg77379  "B engines" FRESHWATER COOLANT PUMPs with 2-1/4" and 2-3/4" impellers] by Breakin Away
 +
* [https://c34.org/bbs/index.php/topic,8939.msg77420.html#msg77420 "B engine" COOLANT PUMP INSTALLATION NOTES] from Breakin Away
 +
* Rebuilding an Exhaust Riser (also from Dave and a C36 skipper [previously posted])  http://www.realitycheck.me/building-...aust-riser.htm
 +
 
 +
* '''Engine Thermostats'''
 +
  '''M-25/XP/XPA; 35/A; early M-25XPB (to March 1998) use these 38mm diameter thermostats:'''
 +
  160*F - Universal p/n 301358 or Kubota p/n 1E399-73010 (replaces 19203-73014, 19203-73013, 19203-73010.)
 +
  180*F - Kubota p/n 15531-73014 (replaces 15531-73013, 15531-73011.)
 +
  38mm Gasket - Universal p/n or Kubota p/n 16851-73270 (replaces 15676-73270, 15531-73270, 15676-73272.)
 +
 
 +
  '''Later M25-XPBs (after March 1998) 44mm 160* F thermostat'''
 +
  Universal p/n 201001 or Kubota p/n 19434-73014 (replaces 19434-73010, 19434-73013)
 +
  44mm Gasket - Universal p/n 298843 or Kubota p/n ?
 +
 
 +
*<font color=red>''Recent update: ''</font color> THERMOSTAT BYPASS HOLE  See '''Service Bulletin #107''',  Kubota Tstats likely won’t have a bypass hole, so drill a 1/8” hole, or two, thru the inside edge of its flange so that there is a constant coolant flow thru the exhaust manifold when the Tstat is closed.
 +
[[File:thermostat with bypass holes.jpg|100px|left|]] <<= Click to enlarge
 +
<br>
  
 
== Electrical ==
 
== Electrical ==
*[http://www.c34.org/wiki/index.php?title=M-25_Alternator_Mount_Conversion_Kit_%22B/M_256891%22 Alternator mount/bracket upgrade] <font color=red> ''Important safety upgrade for M25 (not XP) owners'' </font color><br>
+
*<font color=red>''See also: ''</font color> [[Electrical#Alternators_and_Battery_Chargers|Alternators and Battery Chargers]] <small>(takes you to another section)</small>
 +
*[http://c34.org/wiki/images/3/34/Gauge_Troubleshooting_Steps.pdf Cockpit Engine Panel Gauge Tech Reference / Troubleshooting Steps] --K Kloeber 11/3/2014
 +
*[http://www.c34.org/wiki/index.php?title=M-25_Alternator_Mount_Conversion_Kit_%22B/M_256891%22 Alternator mount/bracket upgrade] <font color=red> ''Important safety upgrade for M25 (not XP) owners by Stu Jackson'' </font color><br>
 
*[[Engine Harness Upgrade|Engine harness upgrade:]] A comprehensive overview by Gerry Douglas <font color=red> ''Important WARNING for M25 owners''</font color><br>
 
*[[Engine Harness Upgrade|Engine harness upgrade:]] A comprehensive overview by Gerry Douglas <font color=red> ''Important WARNING for M25 owners''</font color><br>
*[http://www.c34.org/wiki/index.php?title=M25_%28not_the_XP%29_Engine_Harness_Warning/Upgrade Engine harness upgrade] by Capt. Al<br>
+
*Engine Harness Upgrade from Maine Sail  http://www.pbase.com/mainecruising/universal_wiring_harness_upgrade and http://forums.catalina.sailboatowners.com/showthread.php?t=135558
*[http://www.c34.org/wiki/index.php?title=Faster%2C_More_Efficient_Glow_Plug_Heating_with_a_Solenoid Glow plug solenoid Installation] for faster starting<br>
+
*[http://www.c34.org/wiki/index.php?title=M25_%28not_the_XP%29_Engine_Harness_Warning/Upgrade Engine harness upgrade] by Capt. Al<br><font color=red> ''Important FIRE HAZARD for M25 series owners''</font color><br>
 +
*[http://www.c34.org/wiki/index.php?title=Faster%2C_More_Efficient_Glow_Plug_Heating_with_a_Solenoid Glow Plug Solenoid or Relay Installation] for faster starting<br>
 
*[[How to Add a Secondary Starting Switch in the Engine Box|Secondary start switch]]<br>
 
*[[How to Add a Secondary Starting Switch in the Engine Box|Secondary start switch]]<br>
 
*[[Slow or Difficult to Start Universal M-25XP Engine|Slow start fix]] with a wiring upgrade, starter re-build, and new starting battery by Mike Vaccaro <br>
 
*[[Slow or Difficult to Start Universal M-25XP Engine|Slow start fix]] with a wiring upgrade, starter re-build, and new starting battery by Mike Vaccaro <br>
*[[Tachometer Malfunction Q&A]]<br>
+
*[[Tachometer Malfunction Q&A]]  
 
[[Category:Engine]]<br>
 
[[Category:Engine]]<br>
 +
*Thermostat (temp gauge) Sender Source  http://c34.org/bbs/index.php/topic,7985.0.html]]
 +
*Engine cockpit panel wiring diagram from CD.com, thanks to Noah  http://www.catalinadirect.com/index.cfm/feature/73/z2644--z2855-instrument-panel-wiring-diagram.cfm
 +
 +
== Exhaust System ==
 +
The hot exhaust gases are mixed with cooling water in the exhaust elbow and water muffler on their way to the exhaust outlet in the stern of the boat.
 +
*<font color=blue>'''''Newest''' ''</font color> [[C34 Exhaust with Water Cooled Riser]] From C-34 owner Bill Shreeves<br>
 +
*[[Repairing an AquaLift muffler (with pictures)]] From C-30 owner Mark Hamilton<br>
 +
*[[Exhaust Pipe Replacement|Exhaust pipe replacement]]<br>
 +
*[[Hump Hose Replacement|Hump hose replacement guidance]]<br>
 +
* Exhaust Hose Replacement with Pictures EXCELLENT 4 page discussion with Flix on pages 3 & 4 by Stu  http://c34.org/bbs/index.php/topic,6760.0.html
 +
* EXHAUST NIPPLE from Westerbeke (courtesy of Dave Mauney, O'Day 35, 1989, "DAMWEGAS" , Oriental, NC , M25XP)  http://www.westerbeke.com/SinglePart...f73b1ca82d9219  That link no longer works.  Try this:  http://www.westerbeke.com/search/Asc/10-0/exhaust%20nipple    I got it under parts, search for exhaust nipple.
 +
* Rebuilding an Exhaust Riser (also from Dave and a C36 skipper [previously posted])  http://www.realitycheck.me/building-...aust-riser.htm
 +
*[[Muffler Replacement or Repair|Water-lift muffler: Repair or replace?]]<br>
  
 
==Fuel==
 
==Fuel==
Line 26: Line 94:
  
 
==Mechanical==
 
==Mechanical==
*[[Adjusting Valves]] ''(Be the first to contribute your experience here!)<br>''
+
*[[Adjusting Valves]]  
 
*[[Q&A All About Alternator Belts & Pulleys|All about alternator belt tension & pulleys]]<br>
 
*[[Q&A All About Alternator Belts & Pulleys|All about alternator belt tension & pulleys]]<br>
 
*[[Air Filters]] ''(Be the first to contribute your experience here!)<br>''
 
*[[Air Filters]] ''(Be the first to contribute your experience here!)<br>''
Line 36: Line 104:
 
*[[Rebuilding the M25-XP|Rebuilding a M25xp]] by Dave Sanner<br>
 
*[[Rebuilding the M25-XP|Rebuilding a M25xp]] by Dave Sanner<br>
 
*[[Replacement Filters, Belts, and Lubricants|Replacement filters, belts, and oils equivalents list:]] find alternate replacement brands<br>
 
*[[Replacement Filters, Belts, and Lubricants|Replacement filters, belts, and oils equivalents list:]] find alternate replacement brands<br>
 +
*Universal M-25 & M25XP Alternator Bracket Upgrade & Alignment IMPORTANT http://c34.org/bbs/index.php/topic,7917.0.html
 +
*[http://www.c34.org/wiki/index.php?title=Manuals Universal Diesel Owner's, Parts, and Service Manuals]
 +
 +
*Kubota Filter Equivalents  http://www.orangetractortalks.com/2008/12/gray-market-kubota-oil-filter-part-numbers/<br>
 +
 +
'''[NOTE]''' The filter interchanges at the above OTT website can't necessarily be trusted; double-check if you use them.
 +
For instance, OTT lists NAPA p/n 3389 for both fuel and lube application.
 +
I brought this to OTT's attention and suggested they correct its list.  OTT asked ME to provide THEM
 +
all the correct interchange numbers  nd they would revise the website.<br>  I don't THINK so.  :-)
 +
<small>--[[User:Kloebereng|KWKloeber]] 21:33, 29 June 2014 (PDT)</small>
 +
<br>
 +
 +
== Transmission ==
 +
*[[Transmission Replacement]]
 
*[[Engine Power Loss Diagnosis and Solution|Solving engine power loss:]] Working on the injection pump<br>
 
*[[Engine Power Loss Diagnosis and Solution|Solving engine power loss:]] Working on the injection pump<br>
 
*[[How to Check the Transmission Oil|Transmissions: Checking the oil]]<br>
 
*[[How to Check the Transmission Oil|Transmissions: Checking the oil]]<br>
 +
*Transmission Fluid 101 - link to the message board:  http://c34.org/bbs/index.php/topic,6417.0.html
 +
*[[Better Transmission Dipstick Access - by Phil Spicer]] = link to the message board:  http://c34.org/bbs/index.php/topic,8828.0.html
 
*[[The Right Transmission Gear for Sailing|Transmissions: The right gear while under sail]]<br>
 
*[[The Right Transmission Gear for Sailing|Transmissions: The right gear while under sail]]<br>
*[[Media:TransmissionCable.pdf|Transmissions:Hurth Transmission Cable Adjustment PDF file]]
+
*Transmission Drain Plug Replacement for Crush Washer - thanks to Loren Beach  http://www.ericsonyachts.org/infoexchange/entry.php?213-Hurth-17-mm-Drain-Plug-washer
 +
*[http://c34.org/wiki/images/4/47/Hurth_repair_manual_searchable.pdf Hurth Detailed Searchable Parts Manual] <small>- KKloeber 2016-5-13</small>
 +
*Transmission & Damper Plate Link (from the Forum)  https://c34.org/bbs/index.php/topic,10436.0.html
  
 
==Misc Projects==
 
==Misc Projects==
 +
*<font color=red>''Updated: ''</font color> *Options to Route Crankcase Breather Hose to Air Intake [http://c34.org/wiki/images/1/13/Example.pdf '''VIEW THE PDF''''' ] - K Kloeber May 2021
 
*[[Engine Cover Hinge|Engine compartment cover hinge]]<br>
 
*[[Engine Cover Hinge|Engine compartment cover hinge]]<br>
 +
*[[Removing Engine Using Boom]]
 +
*KUBOTA equivalent parts  '''http://c34.org/bbs/index.php/topic,978.0.html'''
 +
 +
* Removing Engine  Catalina 30 from Captain Dan  with photos - good ideas for re-bracing engine mounts, too  http://forums.catalina.sailboatowners.com/showthread.php?t=168891
 +
 +
 +
 +
* Remote Oil Filter Details from Maine Sail:  http://www.sailnet.com/forums/engines/230865-remote-oil-filter-kubota-diesel.html#post3224841
  
 
== Shaft & Propeller  ==
 
== Shaft & Propeller  ==
Line 52: Line 147:
 
== Also of Interest ==
 
== Also of Interest ==
 
*[http://en.wikipedia.org/wiki/Diesel Diesel Info at Wikipedia]<br>
 
*[http://en.wikipedia.org/wiki/Diesel Diesel Info at Wikipedia]<br>
*[http://www.c34.org/manuals/index.htm Engine Manuals] <br>
+
*[http://www.tongacharter.com/report-alalisis.htm Engine Analysis/survey tips]<br>
 +
*[http://www.c34.org/wiki/index.php?title=Manuals Engine Manuals] <br>
 
*[http://shop.torresen.com/marine_diesel_direct/Universal/index.php?p=include&contentsection=universal&contentname=catalogs Parts Catalog]<br>
 
*[http://shop.torresen.com/marine_diesel_direct/Universal/index.php?p=include&contentsection=universal&contentname=catalogs Parts Catalog]<br>
 +
*[[media:Engine Replacement Guide Revise.pdf|Engine Replacement Guide]]
 +
Westerbeke/Universal now has the owner manuals online. You can download them at http://www.westerbeke.com/Products/OnlineManuals.aspx
 +
 +
Kubota Block Equivalents (you have to scroll down)  http://www.ericsonyachts.org/infoexchange/showthread.php?10241-Universal-5432-amp-M40-engine-information&highlight=kubota+block
 +
 +
and
 +
 +
http://c34.org/bbs/index.php/topic,8113.msg56648.html#msg56648

Latest revision as of 00:13, 20 June 2024

The Catalina 34 has had at least three different engines. The

  • M-25, a 3-cyl, 21 hp engine, was installed on the the early models.
  • M-25XP (3-cyl, 23 hp) became standard in 1988.
  • M-30, a 4-cylinder producing 28hp, became an optional engine about the same time and is standard in the Mark II.

All are produced under the Universal Motors brand (now Westerbeke Corporation). Due to lack of available supplies, the factory occasionally installed a Yanmar engine (note: Yanmars are higher-compression engines, which do not require glow plugs).

Operators, Parts, Service Manuals AND Factory Service Bulletins AND Transmision Manuals

General

CRITICAL UPGRADES includes a lot of engine information: Critical Upgrades http://c34.org/bbs/index.php/topic,5078.0.html

RESOURCES - good M25 engine information,from a C36 owner

Spares for a Long Cruise

http://c34.org/bbs/index.php/topic,4590.0.html

Bleeding 101 http://c34.org/bbs/index.php/topic,6377.0.html

Cooling

The first part pertains more to C30's with M-25s/Oberdorfer pumps, than to M-25XPs -- but it's interesting background anyway.... 
The second part pertains to all those with Ob pumps, and is subtitled "Yes, you're right ...but we don't tell customers that."
-- KWKloeber 15 May 2015
Thanks to Ken for that one, I'm tired of repeating it. - Stu  5/25/2015
  • Engine Thermostats
 M-25/XP/XPA; 35/A; early M-25XPB (to March 1998) use these 38mm diameter thermostats:
 160*F - Universal p/n 301358 or Kubota p/n 1E399-73010 (replaces 19203-73014, 19203-73013, 19203-73010.)
 180*F - Kubota p/n 15531-73014 (replaces 15531-73013, 15531-73011.)
 38mm Gasket - Universal p/n or Kubota p/n 16851-73270 (replaces 15676-73270, 15531-73270, 15676-73272.)
 
 Later M25-XPBs (after March 1998) 44mm 160* F thermostat
 Universal p/n 201001 or Kubota p/n 19434-73014 (replaces 19434-73010, 19434-73013)
 44mm Gasket - Universal p/n 298843 or Kubota p/n ?
 
  • Recent update: THERMOSTAT BYPASS HOLE See Service Bulletin #107, Kubota Tstats likely won’t have a bypass hole, so drill a 1/8” hole, or two, thru the inside edge of its flange so that there is a constant coolant flow thru the exhaust manifold when the Tstat is closed.
Thermostat with bypass holes.jpg

<<= Click to enlarge


Electrical

Exhaust System

The hot exhaust gases are mixed with cooling water in the exhaust elbow and water muffler on their way to the exhaust outlet in the stern of the boat.

Fuel

Mechanical

[NOTE] The filter interchanges at the above OTT website can't necessarily be trusted; double-check if you use them. 
For instance, OTT lists NAPA p/n 3389 for both fuel and lube application. 
I brought this to OTT's attention and suggested they correct its list.  OTT asked ME to provide THEM
all the correct interchange numbers  nd they would revise the website.
I don't THINK so. :-) --KWKloeber 21:33, 29 June 2014 (PDT)


Transmission

Misc Projects


Shaft & Propeller

Also of Interest

Westerbeke/Universal now has the owner manuals online. You can download them at http://www.westerbeke.com/Products/OnlineManuals.aspx

Kubota Block Equivalents (you have to scroll down) http://www.ericsonyachts.org/infoexchange/showthread.php?10241-Universal-5432-amp-M40-engine-information&highlight=kubota+block

and

http://c34.org/bbs/index.php/topic,8113.msg56648.html#msg56648