Catalina 34    Message and Discussion
Join the C34 Association Today!
    [C34 Home] [C34Tech Notes] [C34 Tech Wiki] [C34 Cruising Wiki] [Store] [Join C34IA]
October 25, 2014, 12:10:59 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Put your boat on the Map (see the Wiki). (view boats)
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Kubota / Universal Injector parts Numbers & Engine Block Equivalents  (Read 7241 times)
0 Members and 1 Guest are viewing this topic.
Stu Jackson
C34IA - Secretary
Forum - Master Chief Petty Officer of the Navy
********

Karma: 51
Boat Name / Hull Number: Aquavite #224 1986 SR/FK, M25, NZ Rocna 10 (22#)
Home Port: Alameda, CA
Posts: 5498



View Profile
« on: June 24, 2003, 09:18:25 PM »

May have bbeen covered in one of Ron Hill's Tech Notes, but for your information:
 
 Question:
 
 I have an M25 Universal and believe it is a D850 Kabota. I have the Universal manuals and know the Universal Part Numbers for the fuel injectors I am looking to replace. When I call various Kabota dealers they won't help unless I know the Kabota part numbers. The Universal numbers are 298787 and 298788. Can anyone help?
 
 Answer:  
 
 The injectors are Nippon Denso injectors, i.e., not made by Kubota. The number on the ones I removed was 093500-1560 (the ones I installed are -1570 - I don't know what the difference is).
 
 The reason for two different Universal P/Ns is a banjo nut for the fuel return with either one or two nipples. No matter, since this part won't come with the new Denso injectos, just use the old ones over again.
 
 Universal price is about $200. Rebuild cost quoted locally is $84.00. I bought my replacements for $73.00, LESS than the cost of rebuilding the old ones! Search the web.
 
 
 Stu
 
 (flagrantly stolen from another source)
« Last Edit: April 16, 2008, 10:31:59 AM by Stu Jackson » Logged

Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  San Francisco Bay, SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."
Stu Jackson
C34IA - Secretary
Forum - Master Chief Petty Officer of the Navy
********

Karma: 51
Boat Name / Hull Number: Aquavite #224 1986 SR/FK, M25, NZ Rocna 10 (22#)
Home Port: Alameda, CA
Posts: 5498



View Profile
« Reply #1 on: June 26, 2003, 01:21:41 PM »

DUE CREDIT
 
 In my original posting of this note, I failed to give credit where credit is due.
 
 The original message was posted:  Injector part numbers
 Submitted by John Visser of Westport on 06/24 at 12:25PM regarding General_interest
 on catalinaowners.com
 
 John has a C36, and is very active and authoritative in the technical aspects of the material that shows on that website, and has been known to be "lurking" around here! :)
 
 We look forward to his input.
 
 Stu

PS (10-10-08)  Do a search on Livermore, lists Kubota dealers and other threads on this topic.
« Last Edit: October 10, 2008, 01:34:49 PM by Stu Jackson » Logged

Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  San Francisco Bay, SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."
karista
Guest
« Reply #2 on: June 27, 2003, 02:33:34 PM »

For information purposes, please note the following Universal/Kubota engine cross references  (Kubota equivalent):
 
 Universal M-25 is a Kubota Block D-850
 Universal M-25XP is Block D-950
 Universal M-30 is a Block D-1101&D1102
 Universal M4-30 is a Block Y-850
 Universal M-35 is a Block V-1200
 
 This should help in finding parts at your local Kubota Dealer.


 
 Bernd Mueller
« Last Edit: December 30, 2007, 10:00:39 PM by Stu Jackson » Logged
Roc
Forum - Chief Petty Officer
******

Karma: 3
Posts: 668


View Profile
« Reply #3 on: June 27, 2003, 04:22:31 PM »

I went to a very big Kubota tractor dealer.  This place caters to serious farming equipment.  It is like a new car dealer, but instead of cars, it's filled with gigantic combines, etc.  I gave them the SERIAL number from the Kubota tag I found that is screwed onto the block.  Even with this number, they could not find the equivalent oil filter.  They said I would have to know what Kubota tractor uses that particular diesel, then they would be able to find all the parts based on the TRACTOR model.
 
 Go figure?
 
 Roc-
Logged

Roc - "Sea Life" 2000 MKII #1477.  Rock Hall, MD
Jkar
Guest
« Reply #4 on: July 14, 2003, 01:01:25 PM »

I see that the M25 and the M25XP have different model number engines.  Are the injectors interchangeable?  Also I am not lucky to have a Kubota dealer local, and am having trouble with Yahoo searches.  Does someone have a number local to them that they could post and I could call and have the injectors overnighted?  thanks, Joel
Logged
tandm
Guest
« Reply #5 on: July 14, 2003, 07:48:35 PM »

Try this link.  The page has a complete list of US dealers.
 
 http://www.kubotaengine.com/kubotadistributors.htm
 
 td
 Peregrine #543
Logged
Norris Johnson
Forum - Seaman
**

Karma: 1
Posts: 47


View Profile
« Reply #6 on: July 14, 2003, 07:53:46 PM »

I have a M-35B. I cross referenced with Fram on-line. The fuel filter is P-7514 and the oil filter is PH-3593A.
 
 When my boat was new, I wrote on my Operators Manual the Kubota tractor with this engine was in the L9200 series. I don't know where I got that from. Sorry about causing more confusion.
Logged

Paisano
Catalina 36 MkII 95
Hitchcock, Texas
Norris Johnson
Forum - Seaman
**

Karma: 1
Posts: 47


View Profile
« Reply #7 on: July 15, 2003, 08:16:26 AM »

Thanks Ron for the varifaction.
 
 The Mariposa is in Palacios, Tex. Right in the path of Cladette. Spent all day yesterday getting her ready.
Logged

Paisano
Catalina 36 MkII 95
Hitchcock, Texas
karista
Guest
« Reply #8 on: July 15, 2003, 10:12:37 AM »

Here are a few Kubota part numbers and prices for your Universal 25XP:
 Water pump (Recircul) 15443-73030  $94.35
 Gasket, Water Pump    15676-73430   $0.90
 Thermostat            15531-73010  $17.57
 Gasket, Thermostat    15676-73270   $1.31
 
 These prices are less than half of the Universal prices for the identical parts. I just ordered this kit on-line with a fixed shipping cost of $5.
 Bernd Mueller
Logged
dprice
Guest
« Reply #9 on: July 16, 2003, 02:22:11 AM »

Where on-line did you order them from ?
 
 Thanks
Logged
karista
Guest
« Reply #10 on: July 16, 2003, 09:27:28 AM »

David
 I ordered the parts from: www.TractorSmart.com
 Bernd
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by SMF 1.1.19 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!


Google visited last this page Yesterday at 10:48:55 AM