Join the C34 Association Today!
[C34 Home] [C34Tech Notes] [C34 Tech Wiki] [Join!]
Please login or register.
Advanced search  

News:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - MarcZ

Pages: [1] 2 3 ... 6
1
I have nice dodger frame with aft struts and aft grab rail.
NJ / Worton creek MD area.

2
Main Message Board / Re: advice on upgrading mainsheet blocks
« on: July 16, 2019, 03:49:31 PM »
I would not worry about any deformation under load just look how many ball bearings are bearing (intended) the load,  the number / surface is quite large.

GHm blocks have  10y  warranty

Only time I deviated from generally great GHm hardware was when looking for ratcheting  furling block (Garhauer does not make one ) and rope clutches.

3
Main Message Board / Re: Teak Grate in Head
« on: July 13, 2019, 06:31:07 PM »
I really like this idea and already placed the order.
Susan can you post few more pictures showing corner near the sink and most importantly back side of your grate?
Did you keep rubber feet that grate came with ?
Thank you,
Marc

4
Main Message Board / Re: New Rudder Oversized?
« on: July 09, 2019, 07:41:33 AM »
Look at the http://www.c34.org/wiki/index.php?title=Rudder_Modification

Your new rudder does not look like either version

This thing is going to be very heavy on the wheel

5
Are you looking for bimni or dodger frame  ?
I will have dodger frame for sale soon if you are interested


6
Main Message Board / Re: Secondary Fuel Filter
« on: June 14, 2019, 12:30:04 PM »
What would be the recommended bleeding procedure for M35A ?

7
2 seasons with Oberdorfer N202M-16 mounted om my M35(a), no issues. Normal operating temp is 160F (verified) just like it was with Sherwood pump.



8
Main Message Board / Re: Filling the stanchion vent tube hole.
« on: April 24, 2019, 06:08:19 PM »

Pro way of dealing with holes

https://youtu.be/kxWDhwfCgNE

There is a ton of excellent information on his channel.

9
Main Message Board / Re: PT Boat Worton Creek, Bill Shreaves
« on: April 22, 2019, 06:49:51 PM »

 https://www.ptfnasty.com/ptf19.html

I do not think restoration project is "active" at this point 

About PTF boats
https://www.n6cc.com/trumpy_ptf17

10
Main Message Board / Re: Seaward 2172 Hillerange Oven repairs
« on: April 15, 2019, 02:06:24 PM »
Little dark but I think this is what you are looking for :

12
Main Message Board / Re: PSS shaft seal and engine movement
« on: November 07, 2018, 07:11:32 PM »
I'm looking at Lasdrop Gen II - they eliminated bellows using a spring.....

13
Main Message Board / Re: Instruments - not recognizing speed
« on: October 23, 2018, 07:10:09 PM »
Raymarine has decent guide on the web. I would stress requirement of constant, clean and reliable power when running upgrade ! ( No engine starting , fridge off etc.  )


14
Main Message Board / Re: Instruments - not recognizing speed
« on: October 22, 2018, 07:42:01 PM »
My depth did something similar - these are steps that made my problem go away:
1) Firmware update on iTC-5
2) Resitting all small blade connectors from the transducer
 
How about your depth is it also connected via   iTC and working when speed is out ?

15
Main Message Board / Re: Instruments - not recognizing speed
« on: October 20, 2018, 05:57:02 PM »
How is your speed transducer connected to the network?

Pages: [1] 2 3 ... 6