Recent posts
#1
Main Message Board / Re: conversion to propane
Last post by waughoo - Yesterday at 11:11:28 PMMy propane stove was pretty worn out. I found a good CNG stove and moved all my orifices and oven temp regulator from the LPG stove to the CNG stove so I had a nice condition propane stove.
#2
Main Message Board / Re: conversion to propane
Last post by KWKloeber - Yesterday at 06:39:59 PMHi Cliff
Read this old thread, especially message #1
https://c34.org/bbs/index.php?topic=10365.0
Todd knows his stuff!!! Call Sure Marine and ask about a conversion.
Read this old thread, especially message #1
https://c34.org/bbs/index.php?topic=10365.0
Todd knows his stuff!!! Call Sure Marine and ask about a conversion.
#3
Main Message Board / Re: Epic sailing photos!!
Last post by ewengstrom - Yesterday at 04:23:26 PMSailing out of the Lower Machodoc Creek near Dahlgren,Va. in some pretty sporty conditions.
#4
Main Message Board / Re: Propane tank
Last post by Noah - Yesterday at 03:11:43 PMYou can repaint the tanks however, check the manufacturing date stamp on the tank. They are only allowed to fill them if the tank is less than 12-years old.
#5
Main Message Board / Re: Change water pump?
Last post by Ron Hill - Yesterday at 03:00:11 PMpby : Yes, the weep holes are there to let you know that water or a oil seal needs to be changed!! 
A thought
A thought
#6
Main Message Board / Re: Propane tank
Last post by Ron Hill - Yesterday at 02:56:42 PMJerry : I was able to get a 10lb bottle in that OEM propane bottle Box even after I had the overflow mod added. Also you can modify the inside of that lid incase it is too tall.
As Mentioned, I'd wire brush off the rust and spray paint the old bottle.
A few thoughts
As Mentioned, I'd wire brush off the rust and spray paint the old bottle.
A few thoughts
#7
Main Message Board / Re: conversion to propane
Last post by Ron Hill - Yesterday at 02:47:51 PMCliff : You only need to replace the "orifice fittings" on the burners and the oven!!
A thought
A thought
#8
Main Message Board / Keenan Filters
Last post by crieders - Yesterday at 12:17:36 PMopinions of Keenan Filters for fuel polishing etc
cost for our boats about 1325 bucks! Thanks
cost for our boats about 1325 bucks! Thanks
#9
Main Message Board / Re: conversion to propane
Last post by crieders - Yesterday at 12:16:54 PMi can vent the propane out the stern. Does this mean that the stove and oven has to be entirely replaced because of the burners?
#10
Main Message Board / Re: Propane tank
Last post by Stu Jackson - Yesterday at 10:12:20 AMQuote from: SailingJerry link=msg=97713 date=1716991921
I used a regular 5 lb steel tank but within a year it's showed signs of rust.
/quote]
Have you considered simply applying some Rustoleum paint?