Has anyone (successfully) replaced the lens and gasket on their Lewmar rollstop model trapezoidal foredeck hatch. My hatch was not leaking but the lens was terribly crazed. I opted to buy the "parts" and do it myself . Firstly, because I didn't want to wait the 6-week lead time quoted to me by Select Plastics/Hatch Masters AND I thought "what the heck, it can't be that hard for a savvy boat worker guy like me." WRONG! I am oly doing the hatch lid. I can't seen to get the gasket to conform all the way flush into the corner radius on the hatch lid. Anyone have any tips/tricks for dealing with this particular hatch model? So far I have been really fighting it having installed it once, with visual gaps in gasket corners—after seated and bedded with Dow 795. It passed the SoCa historic 4.5 inch in 3-days rain test last week, not leaking. But it was covered with a Sunbrella hatch cover. Once I removed cover a did the aggressive hose test, it leaked. So I removed it and started over. Now on round two. Any advice would be greatly appreciated.