Join the C34 Association Today!
[C34 Home] [C34Tech Notes] [C34 Tech Wiki] [Join!]
Please login or register.
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: cold starting  (Read 1185 times)

0 Members and 1 Guest are viewing this topic.

Rick

  • Guest
cold starting
« on: December 15, 2001, 06:29:47 AM »

After sitting for a couple weeks, when first starting, there is a long hesitation from the time I depress the the starter switch until the starter turns over. It's a universal M35. When the engine has run and is warm, the starter works normally.  The connections on the starter switch are clean and corrosion free.  Any ideas on this cold starting hestitation?
 
 Thanks,
 
 Rick Niles
 Gentle Storm #1294 Ï
 
 Rick Niles
 Rick@ranfit.comˇ
Logged

jentine

  • Guest
cold starting
« Reply #1 on: December 16, 2001, 05:05:30 AM »

Rick, I had a similar problem and found it to be the in-line fuse to the starter.  The fuse holder leads corroded.  Apparently the current to the starter was just enough to burn through the corrosion.  I cleaned the contacts and have had no problems since.
 Jim Kane ;)
Logged
Pages: [1]   Go Up