Bow-sprit installation

andre · November 28, 2018, 04:28:54 AM

Hello guys, I want to buy a sail Code0 and I need to install a bow-sprit. Is there anybody has made that project on his c34. Thank you.

Jim Hardesty · November 28, 2018, 06:00:18 AM

Andre,
I've only thought about it. If you haven't already, check out.
https://catalinayachtsstore.com
Also search this site, some have beefed-up the anchor roller, some have done much more.

Jim

dfloeter · November 28, 2018, 07:56:42 AM

Here is one option I found this year. A Chicago to Mackinac Solo Challenge competitor mounted a Selden pole on a Catalina 36. It does block the anchor locker but I figured it could be lashed to the lifelines or tucked below.

andre · November 28, 2018, 08:15:30 AM

I don't see your option sir

dfloeter · November 28, 2018, 11:25:39 AM

Maybe this time? At 86kb, this image should load. I saved it before without the .jpg. I should know better.

Gregory M · November 29, 2018, 07:16:07 AM

of the topic,.... Dietrich, something dose not add up here in your profile "1996 Catalina 34 TR WK #1317" ?

KWKloeber · November 29, 2018, 08:08:49 AM

Andre

A fellow C-30-er installed a top-down furler and retractable sprit for his gennaker. I've seen it and it's a real quality job, that's just what he does.
He wanted to start fabricating them for others, but is tied up for right now with life things.

He said he could do one in the spring if you are interested -- or can publish his instructions/materials list if that helps?

-Ken K

dfloeter · November 29, 2018, 12:09:51 PM

Hi Greg, Well, the HIN reads CTYP1317E696 and this makes me wonder. Is this hull number not in the right place?

andre · November 30, 2018, 04:25:26 AM

Hi Ken it would be interesting to see the instruction and materials for the retractable bow-sprit. I would like to try to make the project myself if possible. Thank you.

Roc · November 30, 2018, 04:49:19 AM

I made a permanently mounted bow-sprit. Bolted on the stem head. Picture is WIP shot, and the other has the anchor in the way, but I think you can get the gist.

KWKloeber · November 30, 2018, 07:51:03 AM

Quote from: andre on November 30, 2018, 04:25:26 AM
Hi Ken it would be interesting to see the instruction and materials for the retractable bow-sprit. I would like to try to make the project myself if possible. Thank you.

Andre I'll PM you Ed's contact info - give him a shout.

-k

andre · November 30, 2018, 10:59:00 AM

Nice installation Roc. I want something like that not too big but strong enough

andre · November 30, 2018, 04:13:15 PM

Hi Roc if you have more pictures if possible I don't see what kind of material. Is it just a flat plate or an angle plate and where did you fix that. It's really good and not too big

Wayne · December 05, 2018, 03:50:19 PM

I did a permanent sprit for my code 0; had it fabricated in SS. Basically SS tubing, its foot (aft) bolted down to the deck in front of the anchor locker, mid point bolted to the anchor roller. A bobstay (big turnbuckle) going from the bottom of the anchor roller down to the bottom bolt of the stemhead fitting. For a code 0 I think the bobstay is really important--the loads become pretty amazing.

Jim Hardesty · December 05, 2018, 04:42:12 PM

Wayne,
Your description sounds like something I'd like to add. I would much appreciate if you could post some pictures. No rush, will be months before we can do any yard work around here.
Jim