Dynaplate / Grounding Bar

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Mike McDonald

Hi Everyone,
Back with another question.  I just replaced the old Dynaplate on my boat.  The old one had been painted over.  When I followed the grounding wire, I found that nothing was connected at the other end.  The wire appeared to have three connections in the hanging locker between the nav station and the head, but they had been disconnected by a previous owner.  What components are normally grounded to the Dynaplate?  I assume everything is grounded to the engine at this point.  I would appreciate everyone's thoughts on this.  I also have another problem to post, but will do it separately.  Thanks.
Mike.....
Mike McDonald
1987 / #0396  / M25xp
"Irish Diplomacy"
Pultneyville Yacht Club
Lake Ontario

Stu Jackson

Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."

Mike McDonald

Hi Stu,
Thanks for the link on grounding.  I'll check it out.  Love this forum!
Mike....
Mike McDonald
1987 / #0396  / M25xp
"Irish Diplomacy"
Pultneyville Yacht Club
Lake Ontario

Mike and Joanne Stimmler

It's my understanding that dynaplates are an add on accessory that are usually added when installing a SSB radio and for lightning protection.

Mike
Mike and Joanne Stimmler
Former owner of Calerpitter
'89 Tall Rig Fin keel #940
San Diego/Mission Bay
mjstimmler@cox.net