measurement needed betw. int. bulkheads for 1990 wing cradle

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

kerk fisher

I have two conflicting designs for a cradle for our 1990 wing (#1102). One (from manual) indicates 12' betw. pads, another, (from the Marine Cradle Shop) indicates 13'. Since the pads should be right underneath the interior bulkheads, could someone with a comparable model who is near their boat (ours is 700 mi away!) measure the distance betw. the bulkheads? Thanks, Kerk
Kerk Fisher
C34, Into the Mystic II
Hull #1102, 1990
Sailing the North Channel, Lake Huron
908 Wicksbury Place, Louisville, KY 40207
Louisville, KY 40205
502-454-7759
Alternate email: kerksailmystic@gmail.com

Ron Hill

Kerk : I'd go with the Owners Manual measurement. 
BTW Catalina is still in business, so if you doubt your manual, give them a call and recheck it.  Catalina is still making shipping cradles.  I don't believe the MKI is that much different than the MKII!! (in the bulkhead placement).  Also I'm not too sure how you would accurately measure that distance internally? 
And if someone came back and said that distance is 14 ft or 11 ft, then what would you do??   :think
Ron, Apache #788

Jon Schneider

Kerk, I have 1990 also (#1058).  Not sure if you still need this info, but I measured bulkhead-to-bulkhead distance and it is 13'8" (this also corresponds to the "lift" indicators on the hull.)
Jon Schneider
s/v Atlantic Rose #1058 (1990)
Greenport, NY USA