Blister on Bottom

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Richard Bain

I have some blisters on the bottom of my 86 hull. The survey says they are just in the VC tar, since it is water based.
I would like to strip it down, and re-do....
Any suggestions? Should you scrape or sand blast...Then do you put a barrier coat on the gel....or just anti fowling (VC 17)

Any help would be great...Thanks!

Richie
Richard Bain
"PAZZO"
#113
London, ON, Canada

Mark Wey

Richard: Check this out. http://c34ia.org/phpbb/viewtopic.php?t=1163&highlight= I did it last year. A lot of work but well worth it. I suggest you deal with the blisters and then put a barrier coat on. Inter-protect 2000. Then VC-17. There is a lot of help on this site dealing with the blisters. First step should be to open them up this fall which will give it the winter to drain.

Good Luck!

Mark
Mark Wey
2004 C-36