Raising Backstay/Bridle on Mark 1.25/1.5: Request for measurements

[Patches]

I'm finally getting around to this project.  Like others, I'd like to shorten the Backstay and lengthen the Backstay bridle to allow more head/shoulders room at the helm and while boarding via the swimstep (I have a Mark 1.25).  I'm guessing that I'll have to raise the bridle high enough that the single Backstay turnbuckle at the "Y" will have to be replaced with two turnbuckles (one each where each leg of the bridle goes to a chainplate).  Otherwise, I would never be able to reach the raised single turnbuckle to adjust it.

The Manual says the current Backstay length is 31'9.25" long, and that the Bridle length is 15.0'.

For those that have undertaken this modification, could you kindly provide measurements for the length of your new Backstay and Bridle?

Thanks in advance,

Patches

 

[Noah]

I have NOT done this yet but plan to this month, using a local rigger. He will take measurements. If done before you, I will share the measurements, The lack of "headroom" at the helm doesn't bother me, as I have shrunk to 5' 8" with old age but, boarding the dinghy from the stern ladder and lifting my outboard from the stern rail mount onto the dinghy is a PIA working under/around the backstay split. However, one thing I am grappling with is wondering how the new split height geometry will impact my princess perch seats. I may need to cut a slot in them or trim them a bit? 

[Stu Jackson]

Here is mine.  You can scale the height from the width of the transom.  I did this eons ago and made the mistake of using only one turnbuckle at the high split; it is CRITICAL to use two turnbuckles down at the base of each split.  You'll rarely have to use them, but when you need to...

The dwg is one I think Dave Davis did eons more ago.  I think I used those dimensions but with those blocks & tackle, I'd go higher.  Higher is better anyway.

I used a Garhauer split and Garhauer vang.  LARGE LONG D shackles at the bases.

Read both pages of this, too, found from a search on split backstay - there are many more, too.
https://c34.org/bbs/index.php/topic,3672.0.html

Don't forget the toggles at the base, too.