Search results
Jump to navigation
Jump to search
Create the page "Aft Support 3 (revised).jpg" on this wiki! See also the search results found.
- '''REVISION A – 1-15-2021 The Drawers Section was revised to show the addition of guard rails to the bottom and middle drawers. Photo ...removing cushions or covers. Since I don’t use the hanging/wet locker just aft of the Navigation Station as either, I decided it was a good candidate to u14 KB (2,357 words) - 21:44, 15 January 2021
- '''REVISION A – 9-19-2019 Section 7 was revised due to add photos and text for the wiring inside the anchor locker that was '''REVISION B – 2-02-2021 Section 5 was revised due to purchasing 190 feet of chain instead of 200 feet of chain at 1.1 lbs34 KB (6,014 words) - 00:36, 3 February 2021
- '''REVISION A – 7-31-2016 Section 11 was revised due to re-routing of the #1, 5, and 14 1 AWG cables directly to the engine '''REVISION B – 10-11-2016 Section 10 was revised to change photo #74 to show the chafe guard I made from spare fuel hose use53 KB (9,331 words) - 19:08, 21 August 2022
- ...ve type regulators. These are designed to replace energy used in starting, support electrical loads while the engine is running and maintain or “float” th A good location is under the aft cabin bed under the forward removable cover since this allows short cable r32 KB (5,359 words) - 17:13, 16 October 2013