Join the C34 Association Today!
[C34 Home] [C34Tech Notes] [C34 Tech Wiki] [Join!]
Please login or register.
Advanced search  


Pages: [1]   Go Down

Author Topic: Catalina 34 for sale Upper Chesapeake Bay  (Read 4454 times)

0 Members and 1 Guest are viewing this topic.


  • Forum - Seaman Apprentice
  • *
  • Karma: 0
  • Posts: 1
    • View Profile
Catalina 34 for sale Upper Chesapeake Bay
« on: April 18, 2015, 06:47:22 PM »

1988 c34 with ac, windlass, roller furling, Dutchman mainsail flaking.  Cruising spinnaker.  Great condition. I have manuals and tons of documentation for most equipment.

The boat is a 1988 tall rig, wing keel.  Super clean.  There are no signs of delimitation or blistering.  I've owned the boat for four years.  The  keel bolts have been tightened to factory spec and the "Catalina smile" has been corrected.  All exterior wood work refinished last year.  Hand rails were removed, refinished, and re-bedded.  4 self tailing winches, lines led to cockpit.  Cockpit has teak grating and table, as well as cushions.  Teak interior wood,(not varnished) means keeping the inside looking great as simple as wiping occasionally with some oil

The engine has been well taken care of diesel Mx25XP,  There are 3 batteries that are 3 years old.  The electrical critical upgrades have been done and there is a larger alternator.  3 blade fixed prop.  clean bilges

Electronics include Gps, auto pilot, chart plotter, wind speed/ direction, depth, speed, vhf, am/fm/mp3.

Boat has air conditioning/ heat, battery charger, 2 burner propane (not CNG) stove with oven, head, hot water heater, pressure water, safety equipment, bilge pump with float switch, Head with holding tank.  The macerator pump needs replacing, but since it's illegal to dump sewage, I never attended to it.  Numerous spare parts  are included.

Main hatch and salon hatch lenses have been replaced.  Solar vents are new.  Rig is most likely original but all chainplates have been re-bedded and inspected last year.  Mostly new running rigging.

I have a dodger frame, connector piece and Bimini.  Dodger is not serviceable, but I have the contact info for the guy who built it and he has the patterns.

Boat has teak cockpit grating and table.  The salon table does drop down, but I don't have a filler cushion to make it a double bed.  The table is aftermarket upgrade.  Teak and holly cabin sole.

Boat includes 10' west marine inflatable high pressure inflatable and outboard.  Come take a look
410 963 7056 (c)  Texts and email fine.

« Last Edit: May 09, 2015, 08:40:11 AM by mbaummer2 »
Pages: [1]   Go Up