Join the C34 Association Today!
[C34 Home] [C34Tech Notes] [C34 Tech Wiki] [Join!]
Please login or register.
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: Autohelm  (Read 1985 times)

0 Members and 1 Guest are viewing this topic.

Fulvio

  • Guest
Autohelm
« on: September 05, 2001, 05:47:38 PM »

My Autohelm ST 4000 just broke.  The disengage lever won't stay in the "engaged" position anymore.  
 That lever has been giving me a little trouble for a while.  Even when disengaged, the wheel would rattle quite often when turned.
 
 I am curious if anyone has had this problem before, and how much it cost to fix.
 
 Fulvio Casali
 Seattle WA
 Soliton
 #929 (1989)
Logged

mvazmina

  • Guest
Auto Helm
« Reply #1 on: September 06, 2001, 06:54:43 AM »

I had a similar problem and was able to have a repairman out to fix it for less than $100. It seems that some of the plastic wears and needs to be replaced.  The hardest thing was to find someone that would work on the unit.
Logged

captaingary

  • Forum - Seaman Apprentice
  • *
  • Karma: 0
  • Posts: 7
    • View Profile
ST4000
« Reply #2 on: September 06, 2001, 07:50:03 AM »

Mine broke about a year ago and I ordered a new lever from Raytheon for $35. It is easy to install and works just fine.
Logged
Gary Schneider
Windmill #1231
Long Beach  CA

Bill Sedgwick

  • Forum - Seaman Apprentice
  • *
  • Karma: 0
  • Posts: 22
    • View Profile
ST4000
« Reply #3 on: September 06, 2001, 08:06:22 AM »

Min broke about 2 weeks ago. Both of the roll pins connecting the pinch roller to the shaft sheared. I drilled out the pins and replaced them. The most difficult problem was finding 1/8" roll pins. I did not not find a pin long enough for the lever which must be removed to reassemble the roller. When I pressed it out it was also in 2 parts about to fail. Now, it's just a pressed in metal rod fabricated from a stainless nail.
Logged
George W (Bill) & Jo Ann Sedgwick
SchatzSea #1031

jentine

  • Guest
Autohelm
« Reply #4 on: September 07, 2001, 02:25:22 PM »

The usual problem is the rolled pins in the engagement cam break.  They are available from Raytheon for a few cents each.  The shipping and handling cost much more than the parts.  Whe I replaced mine, I drilled through both parts to make the next repair easier.
Logged

pklein

  • Guest
Autohelm
« Reply #5 on: September 12, 2001, 06:54:00 PM »

I suggest you talk to the technicians at Raytheon and get an estimate for a Factory rebuild.  I believe it's a few hundred bucks, but considering the fact that nothing lasts forever there are probably other parts that need replacement.  Most important is the peace of mind you will have knowing that the unit is as good as new when you have to rely on it to let you sail the boat through sleet and *#%~!!!.  Unless of course you live in the islands.  I'm on Lake Michigan which is well know for its *#%~!!!.
 
 Phill Klein
 Andiamo #977
 Montrose Harbor - Chicago
Logged
Pages: [1]   Go Up