Pressure cap on Universal

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

morgan4848

I have a 1986 MkI with the Universal M25. As I was doing routine maintence on the Universal M25 I noticed a crack in the pressure cap for the cooling system.  There are no markings on the cap to indicate the pounds pressure.  I checked the manual and the tech notes with no luck.  Anyone know what the correct replacement would be?

Stu Jackson

My inventory list says:  ï»¿Engine: Coolant Cap Universal Installed 1/3/99 Use # SKE SK3516 small #14 DON'T Use #SEN6582 #15

I was given the wrong one originally by our local Universal parts dealer, and had to go back and switch to the right one.  If you have a local dealer, bring the old one in.

Also check the Universal website:

http://www.marinedieseldirect.com/universal/
Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."