Insulated wrap on exhaust riser

[Terry Forshier]

I am doing the exhaust riser replacement process. I have had to add a length of pipe, coupling etc from the manifold to the riser to make it fit. (old one also had this but the replacement did not have it) It is bout 4 inches. I would lke to wrap this in similar insuallation but have not found any similar materila at the Napa or Autozone stores. Does anyone know where to get this? It is like a tin foil snadwitch with fibrous insullation about 1/8 inch thick in the center. It wraps and keeps the shape then is wired on to the pipe. ?

[Ron Hill]

Terry : Call up the guys that made your new riser and tell them you need a small additional piece of insulation.