Vberth storage access

Ron Hill · February 16, 2006, 05:38:33 PM

A few post back people were talking about this access. Thought I attach a few pictures to let you see some ideas.
I used louvered door on the sides to facilitate ventilation (with out it you get mold). Also note the "door hook" that holds the insert in place.

Ron Hill · February 16, 2006, 05:40:56 PM

Sorry about that, it didn't attach the first time.

The side doors have been in place for 18 years and the bottom door for about 14. All doors are stock items from a marine catalog !

Jim Price · February 16, 2006, 05:45:29 PM

Great ideas. Unfortunately (or fortunately) I cannot use the lower center access as that is the intake for the Heat / Air system but am interested in the two smaller side accesses. Where did you get the doors / frames or did you make?

Stu Jackson · February 16, 2006, 09:40:30 PM

Jim

I'd bet the doors are from H&L Marine, the OEM suppliers to our boats.

This started at: http://c34.org/bbs/index.php?topic=1268.0

Phil Spicer · February 17, 2006, 04:57:57 AM

Ron,
What do you use on your interior teak? Looks wonderful !
Phil

Ron Hill · February 17, 2006, 01:17:36 PM

Phil : I use Starbright Golden teak oil, but haven't re coated in the last 10? years.

The 1ft square louvered doors on each side and the 16" door(18" frame) at the bottom were purchased from Boat US. Just saw the same doors in the new Defender catalog.

Jim Price · February 17, 2006, 02:29:04 PM

Thanks for the info. Just got a Defender catalog in the mail today. What timing!

Ron Hill · February 17, 2006, 05:55:16 PM

Almost forgot to show the top side of the 1/2" insert that I made. Epoxy-ed on some left over flooring.