does anyone know where this goes

[Jim Hardesty]

Found this pin under my stove, Seaward Hillerage/princess.  Thats not threads but barbs, I'm thinking it gets pressed into something.  The manual doesn't show anything that looks like this.  It's maybe 5/8 long and 3/16 dia.
Jim

[sselinger]

Could this be the pin which locks the stove from swinging?

[Ron Hill]

Jim : It looks like there is some wear on that pin.  Look to see if it is part of the oven door hinge.

A thought

[KWKloeber]

Looks to me like the grooves might be made to receive a fork in a slot to hold the pin in place or to secure something like e  spring on the pin using an outside cotter (hairpin clip) that slips into a slot.  Is there anything spring loaded around?

[J_Sail]

Any chance it's one of the gimbal pins?
Item 40 is parts diagram below:
https://www.marlow-hunter.com/wp-content/export/Vendor-Manuals/Seaward%20Princess%20Stove.pdf

[Jim Hardesty]

Any chance it's one of the gimbal pins?

I don't think so.  The gimbal works as does everything on the stove.  Thanks for the information, looks to be more complete than mine.  Plan is to give the stove a good cleaning/inspection/search for a hole missing a pin.  Thinking about reaching out to Seaward. 
Jim

[Craig Illman]

Also, maybe contact Sure Marine in Seattle. (800) 562-7797  or https://www.suremarineservice.com/Contact-us.html