Dave DeAre
Forum - Seaman Apprentice
Karma: 0
Boat Name / Hull Number: 1626
Model Year: 2002
Home Port: Burnham Harbor, Chicago
Posts: 11
|
 |
« Reply #15 on: February 03, 2012, 09:53:34 AM » |
|
My last boat C-30 FK, TR came with a hi-tech 150. We did poorly in the Weds Beer Can races; 150 was too heavy for light air and too big for really heavy air. I had UK make a new dacron 135 and in the 1st year of use won the YC Beer Can series jib & main. My 34 has a heavy Catalina 150 that exhibits the same as above. When I buy a new headsail it will be a 135.
|
|
|
|
|
Logged
|
|
|
|
Kevin Henderson
Forum - Petty Officer 2nd Class
  
Karma: 3
Boat Name / Hull Number: Pau Hana / #791
Model Year: 1988
Home Port: San Diego, CA
Posts: 152
Pau Hana
|
 |
« Reply #16 on: February 03, 2012, 11:45:46 AM » |
|
The PO of Pau Hana liked to race and had 150 with a really low cut foot. That sail is now badly used and tired and In September I had ordered a new 135 to be delivered in March. For our purposes (Cruising) I think we will find the 135 easier to handle and the foot cut a little higher to allow better visibility. 
|
|
|
|
« Last Edit: February 03, 2012, 01:15:57 PM by Kevin Henderson »
|
Logged
|
The sail, the play of its pulse so like our own lives: so thin and yet so full of life, so noiseless when it labors hardest, so noisy and impatient when least effective. ~Henry David Thoreau
|
|
|
MarkT
Forum - Petty Officer 3rd Class
 
Karma: 0
Boat Name / Hull Number: Alena / 326 SR/WK
Model Year: 1987 M25
Home Port: Gloucester Point VA
Posts: 50
|
 |
« Reply #17 on: February 03, 2012, 11:50:23 AM » |
|
I replaced my 150 with a 135 last year. The improvement in boat handling in gusty conditions is pronounced. Where with the 150 we would be fighting to keep the boat going in the direction we wanted when the wind gusted (even when dumping the main) now we just pick up more power. I know this is mostly the difference between an old sail and a new one. I couldn't be happier with the upgrade and it sure makes for a happier 1st mate when she is the one steering the boat. Our boat has the wing keel and is a mk1 with the original rudder.
IMHO If it is about going fast - get the 150 and figure out how to get every bit of power you can out of it without too much rudder. If it is about making the boat easy to sail and more forgiving - get the 135.
My $0.02
Mark Tamblyn
|
|
|
|
|
Logged
|
|
|
|
claygr
Forum - Petty Officer 2nd Class
  
Karma: 1
Boat Name / Hull Number: 873
Model Year: 1989
Home Port: Milwaukee, WI
Posts: 157
|
 |
« Reply #18 on: February 03, 2012, 05:40:27 PM » |
|
Thanks for the excellent input. The 135 may well be a better choice for our every day use because we like to go out and play in the heavier air. The 150 still has some stiffness left so we could bring that out in JAM conditions that require the bigger sail. I have to say I would appreciate the better visibility of a 135 when we're heading up to the start line.
|
|
|
|
|
Logged
|
1989, Hull #873, "Serendipity," M25XP, Milwaukee, Wisconsin
|
|
|
|
Stu Jackson
|
 |
« Reply #19 on: February 03, 2012, 09:49:31 PM » |
|
I have to say I would appreciate the better visibility of a 135 when we're heading up to the start line.
The size of the sail is not proportional to the view. Forgive me for saying this, but : "It's the cut of your jib!!!" 
|
|
|
|
|
Logged
|
Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite" San Francisco Bay, SR/FK, M25, Rocna 10 (22#) (NZ model)
"There is no problem so great that it can't be solved."
|
|
|
marksutherland
Forum - Seaman Apprentice
Karma: 0
Boat Name / Hull Number: Palomar
Model Year: 1986
Home Port: Long Beach CA(Shoreline)
Posts: 23
|
 |
« Reply #20 on: February 09, 2012, 05:00:50 PM » |
|
I concur with the reduce-the-main first chorus. You can reduce the the weather helm a bit by simply "easing" or de-powering the main, but I really don't like my main luffing too much, so I generally reef it or drop it completely. What I REALLY like a lot in 18-25 knots, is sailing with Jib only, as Stu said. It kills the weather healm altogether which makes steering as effortless as an 8 knot wind, it reduces heel, and the boat still goes 7+ knots. It turns an otherwise hair-raising sail into a comfortable one. Caveat: I read somewhere that running jib only in over 25 knots can put too much stress on the rig.
|
|
|
|
|
Logged
|
|
|
|
|
Stu Jackson
|
 |
« Reply #21 on: February 09, 2012, 08:50:15 PM » |
|
... It turns an otherwise hair-raising sail into a comfortable one.
Caveat: I read somewhere that running jib only in over 25 knots can put too much stress on the rig.
Urban myth. Half the sail area reduces the load on the rig.
|
|
|
|
|
Logged
|
Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite" San Francisco Bay, SR/FK, M25, Rocna 10 (22#) (NZ model)
"There is no problem so great that it can't be solved."
|
|
|
Jim Hardesty
Forum - Petty Officer 1st Class
   
Karma: 1
Boat Name / Hull Number: Shamrock/1570 M35BC
Model Year: 2001
Home Port: Erie PA
Posts: 271
|
 |
« Reply #22 on: February 10, 2012, 09:13:39 AM » |
|
I'm not a sail maker or a fabric engineer, just repeating what was told to me. And made sense. When sailing in strong winds (25-30kn) and using a single unreefed sail (dacron) that wasn't designed for the high loads, the sail will stretch and never return to original shape. So, if the purpose is to have a given sail area for a wind speed, it is desireable to have the load spread over 2 reduced sails. His point was even if the boat handled ok it was better for fabric sails to be reefed.
|
|
|
|
« Last Edit: February 10, 2012, 12:53:06 PM by Jim Hardesty »
|
Logged
|
Jim Hardesty 2001 MKII hull #1570 M35BC "Shamrock" sailing Lake Erie from Commodore Perry Yacht Club Erie, PA
|
|
|
|
Ted Pounds
|
 |
« Reply #23 on: February 10, 2012, 11:56:51 AM » |
|
There was an article in Practical Sailor a few years back about running jib only. They said it was not a problem, especially on stiff, sturdy, over-built rigs like the C34 has. 
|
|
|
|
|
Logged
|
Ted Pounds "Molly Rose" 1987 #447
|
|
|
Hawk
Forum - Petty Officer 1st Class
   
Karma: 3
Boat Name / Hull Number: Tiny Dancer/1094
Model Year: 1990
Home Port: West Vancouver, BC. Canada
Posts: 242
|
 |
« Reply #24 on: February 11, 2012, 01:12:33 PM » |
|
I recall that the issue regarding stress on the mast and rig when sailing with jib alone was more to do with the stresses on the mast caused by manging in big seas rather than wind speed. The reefed main providing additional stability to the mast in heavy seas.....I took that to mean offshore largely.
Hawk
|
|
|
|
|
Logged
|
Tom Hawkins - 1990 Fin Keel - #1094 - M35
|
|
|
|