Fuel Pump Fail?

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rjabara

Ron, yes I think welding an option but I felt better about replacing since in 2 pieces.

Does anyone have the air silencer pictured above?  I cannot figure out how to open it in order to clean and replace the filter. 

Thanks

Rich
1990 c34 MK1.5
Chesapeake Bay, MD
Hull 1111 Engine M35

Ron Hill

#31
Rich : Look at the bottom of your air cleaner and you should see a hose clamp attached to the bottom. Take a screwdriver and loosen the screw and it should lift right off. On the inside is a filter made of metal shavings.

I clean the shavings with lacquer thinner and then spray a thin coat of clean oil an the shavings. Reinstall and it should be good for a couple of years - as the engine compartment is a fairly clean environment!!

A few thoughts   :thumb:
Ron, Apache #788