Replacement part numbers for the engine coolant circulation pump on the M-25, M-25XP, M-25XPA, M-35, M-35A

From c34.org
Revision as of 09:15, 14 July 2019 by Kloebereng (talk | contribs)
Jump to navigation Jump to search

The M-25 is built on the Kubota D850 block, the M-25XP and XPA are built on the Kubota D950 block. Both those Kubota blocks and the M-25/XP/XPA engines use the SAME coolant circulation pump. So the P/Ns for either Kubota engine block will fit the other. However, you may locate different P/Ns for the same pump because Kubota keys its P/Ns to the specific application in which the engine is used (e.g., B6200 tractor, B7200 tractor, Bobcat, excavators) and not keyed to the engines themselves (D850, D950.) So there are oftentimes different Kubota P/Ns for exactly the same physical part (like the coolant pump.)

Additionally, Kubota is constantly updating and assigning new P/Ns, so the current P/N for a coolant pump today could be a different P/N tomorrow. So the pump P/Ns in the Kubota parts manuals on the wiki page Wiki Parts Manuals are the original P/Ns, and they have changed over the years.

Luckily, there is a good source for updated P/Ns - www.messicks.com (an agricultural Kubota dealer that also sells online.) Messicks isn't the least expensive on OEM Kubota parts, but it is a very knowledgeable source, the parts folks are super cooperative and helpful, and Messicks provided many of the Kubota parts manuals that are posted in the wiki.

Kumar Brothers (www.kumarbrosusa.com) sells many (but not all) aftermarket parts for our engines. There are other both OEM and aftermarket Kubota parts sources, such as Country Sales and Service -- so do your homework before buying.

The current (7/2019) P/N for the coolant pumps are below. If you plug any Kubota P/N into the Messicks site:

Messicks page.JPG
It will return that P/N history (and any "Replaced by" P/Ns, which you can use to purchase from any source you choose.)
Messicks pump page.JPG

From your local Westerbeke dealer or online:

Westerbeke.com online parts
P/N 300203 (OEM Universal Motors part)
$385.30
Mounting gasket P/N 300204

From Kubota dealers and aftermarket sellers (e.g., KumarBros) use the Kubota P/Ns:

Old P/N: 15534-73030
Current (7/2019) P/N: 15534-73033
Mounting gasket P/N 15676-73430

When you buy, verify whether the seller includes the mounting gaslet.
Additionally save your old pump, as some sellers do not include the hose nipple (the water heater connection) that screws into the top of the pump.