Difference between revisions of "Electrical"

From c34.org
Jump to navigation Jump to search
(41 intermediate revisions by 4 users not shown)
Line 1: Line 1:
Modern gear such as refrigeration, chartplotters, radar and computers required a well sized and maintained 12v system.
+
Modern gear such as refrigeration, chartplotters, radar and computers require a well sized and maintained 12v system.  These articles also include important SAFETY items.  Also read the CRITICAL UPGRADES topic on the Forum.
  
 
== Alternators and Battery Chargers ==
 
== Alternators and Battery Chargers ==
Line 16: Line 16:
 
*[[Deep Cycle Battery FAQs from Northern Arizona Wind and Sun]]
 
*[[Deep Cycle Battery FAQs from Northern Arizona Wind and Sun]]
 
*[[Recharging Dead Batteries]]
 
*[[Recharging Dead Batteries]]
 +
*[http://c34.org/wiki/images/4/44/SmartGauge_Electronics_-_Interconnecting_multiple_batteries_to_form_one_larger_bank.pdf How to properly connect multiple batteries into one bank.] (PDF) By Chris Gibson, inventor of the SmartGauge --[[User:Kloebereng|KWKloeber]] 12/10/18
  
 
== Electrical Panel, Wiring & Lighting ==
 
== Electrical Panel, Wiring & Lighting ==
Line 25: Line 26:
 
*[[Catalina 34 Electrical System Upgrade|Electrical system upgrade]]: A comprehensive electrical system upgrade by Jim Moe<br>
 
*[[Catalina 34 Electrical System Upgrade|Electrical system upgrade]]: A comprehensive electrical system upgrade by Jim Moe<br>
 
*[[Electrical System 101 - Good LINKS from the Message Board|Electrical System 101]]: Comprehensive electrical system BASICS by Stu Jackson  http://c34.org/bbs/index.php/topic,5977.0.html<br>
 
*[[Electrical System 101 - Good LINKS from the Message Board|Electrical System 101]]: Comprehensive electrical system BASICS by Stu Jackson  http://c34.org/bbs/index.php/topic,5977.0.html<br>
 +
*[[1987 MK 1 Catalina 34 Electrical System Upgrade]]:  Winter 2015-6 - A very thorough redesign of a Mark I system by Jon Windt, s/v Della Jean
 
*[[12 VDC Electrical System Upgrade – Winter 2003|Electrical system upgrade]] by John Gardner (includes pictures of 6V batteries)<br>
 
*[[12 VDC Electrical System Upgrade – Winter 2003|Electrical system upgrade]] by John Gardner (includes pictures of 6V batteries)<br>
 
*[[Electrical System Upgrade - Yorkshire Rose|Electrical system upgrade]]: Another perspective by Mark Elkin<br>
 
*[[Electrical System Upgrade - Yorkshire Rose|Electrical system upgrade]]: Another perspective by Mark Elkin<br>
Line 48: Line 50:
  
 
==Solar Energy==
 
==Solar Energy==
[[Solar Power|400 Watt Bimini]] <br>
+
* [[Solar Power|400 Watt Bimini]] <br>
 +
* [[Flexible solar panels]]
  
 
==Starters==
 
==Starters==
Line 55: Line 58:
  
 
==Items of Interest==
 
==Items of Interest==
There are over 75 [http://c34.org/tech-notes-index/index.htm Tech Notes] on these subjects.
+
There are over 75 [http://c34.org/tech-notes-index/index.htm Tech Notes] on these subjects.<br />
 
+
*[[(Moisture-proof) Alternative to open-type terminal strips]] <small>--added by [[User:Kloebereng|KWKloeber]] 9 May 2015</small>
 
 
== (Moisture-proof) Alternative to open-type terminal strips ==
 
 
 
I'm not generally a fan of terminal strips in the marine environment -- IF I can avoid them, I do.
 
HOWEVER I can't, then I use them judiciously -- in the proper locations (e.g., not an open terminal strip, in an engine compartment or bilge, hanging by a thread, no physical protection, wire/cable support/strain relief, etc.)
 
 
 
THAT said, I have probably a dozen terminal strips for everything from mast light wiring to TV/RF to masthead instrument cables.  BUT they are mounted in moisture-proof boxes with moisture-tight wire entries.
 
 
 
I made my own setups with moisture tight 4" x 4" x 2" PVC Cantex (left) or Carleton (right) electrical junction boxes (from big box building supply/online/Amazon etc.)
 
[[File:box.jpg]]  [[File:box2.jpg]]
 
 
 
They have no openings for conduit or threaded blanks -- just a totally solid case, w/ gasketed cover, and mounting ears so they don't need to be compromised with a mounting hole.
 
 
 
 
 
'''I tried several ways to get a moisture tight wire entry, but this method was the best:'''
 
 
 
 
 
*[[Get appropriate-size nylon male npt x hose barb adapters -- Grainger carries many sizes -- so I got a dozen of different mnpt and barb combinations, up to 3/8" mnpt.]]<br>
 
 
 
[[File:barb.png]]
 
 
 
*[[Drill, tap the box side for whatever nylon adapter that your conductor or coax cable will pass thru. (I generally use one barb per pass thru, but sometimes combine multiple conductors thru one barb.)]]<br>
 
*[[Screw in the adapter, pass thru your cable or conductor, apply  heat shrink tubing (HST.) .  Voila`]]<br>
 
*[[Where you have multiple conductors thru one adapter, stick a tiny (4" variety) wire zip-tie on the end of the HST to mush the adhesive into the cable/conductor voids.]]<br>
 
*[[Mount the terminal strip to the inside box cover (w/ thru-cover, countersunk, flat-head, s/s machine screws and nylock nuts) -- so that with fat fingers it's easier to wire up the strip, and you can bury enough wire/cable in the box to pull the cover out and easily work on the strip later.]]<br>
 
 
 
 
 
Those boxes also come in 6" size, and there's many similar inexpensive, gasketed solid boxes online in rectangular/round/whatnot configurations.  Some w/ and some w/o mounting ears.
 
 
 
 
 
--[[User:Kloebereng|KWKloeber]] 14:18, 9 May 2015 (PDT)
 

Revision as of 00:02, 11 December 2018

Modern gear such as refrigeration, chartplotters, radar and computers require a well sized and maintained 12v system. These articles also include important SAFETY items. Also read the CRITICAL UPGRADES topic on the Forum.

Alternators and Battery Chargers

Batteries

Electrical Panel, Wiring & Lighting

Generators

Inverters

Lightning

Solar Energy

Starters

Items of Interest

There are over 75 Tech Notes on these subjects.