Difference between revisions of "Dish & Glass Rack"

From c34.org
Jump to navigation Jump to search
Line 1: Line 1:
[[Image:Shelf23.jpg‎]]<br>
+
[[Image:Shelf23.jpg|thumb|350px‎|right]]br>
 +
 
 
The shelf is super strong - the strength comes from having a threaded rod with end plates on both ends. We have made several crossings to and from the Bahamas with seas up to eight feet. We never lost a dish. Picture to the left shows the support on the bottom of the threaded rod. A similar plate is attached above under the slide for the companionway. Installation requires removing the companionway slide to install the top braces and reinstalling the slide. The treaded rods are covered with teak and the supports for the dishes are teak. The installation is very labor intensive but we could make a kit.  Visit Joe's Home Page at
 
The shelf is super strong - the strength comes from having a threaded rod with end plates on both ends. We have made several crossings to and from the Bahamas with seas up to eight feet. We never lost a dish. Picture to the left shows the support on the bottom of the threaded rod. A similar plate is attached above under the slide for the companionway. Installation requires removing the companionway slide to install the top braces and reinstalling the slide. The treaded rods are covered with teak and the supports for the dishes are teak. The installation is very labor intensive but we could make a kit.  Visit Joe's Home Page at
 
http://www.e-marine-inc.com/catalina.html
 
http://www.e-marine-inc.com/catalina.html
  
  
[[Image:Shelf13.jpg‎]] [[Image:Shelf43.jpg‎]][[Image:Shelf53.jpg‎]]
+
[[Image:Shelf13.jpg‎|thumb|300px|left]]  
 +
[[Image:Shelf43.jpg|thumb|300px‎]]
 +
[[Image:Shelf53.jpg|thumb|300px‎]]

Revision as of 23:35, 31 January 2009

350px‎

br>

The shelf is super strong - the strength comes from having a threaded rod with end plates on both ends. We have made several crossings to and from the Bahamas with seas up to eight feet. We never lost a dish. Picture to the left shows the support on the bottom of the threaded rod. A similar plate is attached above under the slide for the companionway. Installation requires removing the companionway slide to install the top braces and reinstalling the slide. The treaded rods are covered with teak and the supports for the dishes are teak. The installation is very labor intensive but we could make a kit. Visit Joe's Home Page at http://www.e-marine-inc.com/catalina.html


Shelf13.jpg
300px‎
300px‎