Raw water pump and cooling system

From c34.org
Jump to navigation Jump to search

Raw sea water enters the boat through a Thru hull fitting under the head sink. It goes through a strainer to the engine driven raw water pump. There are two manufactures of the raw water pump, Sherwood and Oberdorfer. The raw water pump pushes water through the heat exchanger and into the exhaust system to cool the antifreeze solution and the exhaust. Raw water leaves the boat mixed with the exhaust gases.

Impellers: the Universal M25 XP the Globe #610 impeller is the right fitting raw water impeller for that engine. This is a run-dry impeller and it tends to last a lot longer than the other impellers. You can buy this from:

www.defender.com

Or use this hot link: http://www.defender.com/product.jsp?...9302&id=200101

See also: Priming the pump

Retrieved from "https://c34.org/wiki/index.php?title=Raw_water_pump_and_cooling_system&oldid=3296"