Rudder
General
With the introduction of the Catalina 34 Mark II the rudder was updated to be longer with an elliptical design. Some Mark I owners have updated their original rudders with a new Elliptical Rudder for more control and smoother handling.
Ron Hill has done his own impressive modification to the rudder on his Mark I with a Wing Keel.
- The rudder post goes through a packing gland
- Rudder Bearing drawing
- Rudder Removal drawing
Maintenance
Note that I used the resin method, using epoxy resin mixed with graphite (see West Systems website for info on making self-lubricating bearing surfaces.) But instead of pouring resin down the tube, I used the West caulking gun tubes, injecting the mix thru several holes drilled into the backside of the rudder tube. - KWKloeber 4/2015
Steering
[December 2018] The following links no longer work because Edson modified their own website negating the links. If you need Edson information, visit www.edsonmarine.com
- Edson Marine Steeering Inspection PDF file
- Edson Pedestal Engine Control Installation PDF file
- Edson Steering Cable components PDF file
- Edson Steering Cable components PDF file
- Edson Pedestal Shaft Wheel Attachment
- Edson Marine Tech Support -Clicking this link takes you to the Edson site
Also of Interest
There are several articles of interest concerning Rudders in the Tech Notes
