Difference between revisions of "Stuffing box"
(New page: The purpose of a stuffing box is to keep water from entering the boat thru the hole that a shaft (prop, rudder) exits the boat. Should you have a traditional stuffing box or a dripless re...) |
|||
Line 1: | Line 1: | ||
− | The purpose of a stuffing box is to keep water from entering the boat thru the hole that a shaft (prop, rudder) exits the boat. | + | The purpose of a stuffing box is to keep water from entering the boat thru the hole that a shaft (prop, rudder) exits the boat. Which is better, a traditional stuffing box or a dripless replacement? [[http://c34.org/faq-pages/faq-stuffing-box2.html]] |
− | Tools to make the | + | Tools to make the job easier. [[http://www.c34.org/Catalina-review.jpg]] |
How to repack the Stuffing box. [[http://c34.org/faq-pages/faq-stuffing-box.html]] | How to repack the Stuffing box. [[http://c34.org/faq-pages/faq-stuffing-box.html]] |
Revision as of 18:29, 4 April 2008
The purpose of a stuffing box is to keep water from entering the boat thru the hole that a shaft (prop, rudder) exits the boat. Which is better, a traditional stuffing box or a dripless replacement? [[1]]
Tools to make the job easier. [[2]]
How to repack the Stuffing box. [[3]]
It is possible to repacking the stuffing box while in the water. After unscrewing the packing nut from the shaft log, wrap a rag or strip of cloth around the shaft. Snug it up against the open shaft log and secure with a hose clamp or ziptie. Any water that enters the boat will be easily handled by the bilge pump.
How warm is too warm? [[4]]
Contents
Dripless packing for Stuffing Box
[[5]]
Dripless Stuffing Box Replacment
This is not an endorsement of this brand, although several owners report excellent results. PYI Dripless Shaft Seal [[6]]
Flexable Coupling
[[7]]
Rudder Packing Gland
There is a Technote on replacement of the rudder shaft packing gland. Information can also be found on the Edson web site. www.edsonmarine.com