Difference between revisions of "Cabinet Fiddles"
(New page: ==Adjustable Cabinet Fiddles== '''by Mark Elkin, ''Yorkshire Rose'' #133''' ---- I finally got tired of the mixed up mess I'd find in the cabinet inside the head after a day of sailing o...) |
|||
Line 8: | Line 8: | ||
The 1/2" x 1/2" notched pieces will interlock. After measuring and cutting pieces to the approximate size for their location, I glued each 1/2" x 1" flat piece edge-to-edge with the appropirate notched piece to give some "height" to the fiddles when completed. Then it was just a simple matter to install in the cabinet and adjust once the "stuff" was loaded back in. | The 1/2" x 1/2" notched pieces will interlock. After measuring and cutting pieces to the approximate size for their location, I glued each 1/2" x 1" flat piece edge-to-edge with the appropirate notched piece to give some "height" to the fiddles when completed. Then it was just a simple matter to install in the cabinet and adjust once the "stuff" was loaded back in. | ||
− | <gallery caption="(Click on any picture to enlarge)" perrow="4" | + | <gallery caption="(Click on any picture to enlarge)" perrow="4"> |
Image:Head-fiddle1.jpg | Image:Head-fiddle1.jpg | ||
Image:Head-fiddle2.jpg | Image:Head-fiddle2.jpg |
Revision as of 04:48, 22 January 2009
Adjustable Cabinet Fiddles
by Mark Elkin, Yorkshire Rose #133
I finally got tired of the mixed up mess I'd find in the cabinet inside the head after a day of sailing on the (not always so) Pacific. So I was going to make some fiddles to keep stuff in it's place. But I didn't like the idea of fixed fiddles. While browsing at a Boat/US store, I saw some teak grating pieces but realized these would solve my adjustable fiddles problem.
The 1/2" x 1/2" notched pieces will interlock. After measuring and cutting pieces to the approximate size for their location, I glued each 1/2" x 1" flat piece edge-to-edge with the appropirate notched piece to give some "height" to the fiddles when completed. Then it was just a simple matter to install in the cabinet and adjust once the "stuff" was loaded back in.
- (Click on any picture to enlarge)
While I specifically was looking to solve the "won't stay in place" issue in the head cabinet, this same technique is easily used anywhere you may want adjustable fiddles.