Difference between revisions of "Cabinet Fiddles"

From c34.org
Jump to navigation Jump to search
(New page: ==Adjustable Cabinet Fiddles== '''by Mark Elkin, ''Yorkshire Rose'' #133''' ---- I finally got tired of the mixed up mess I'd find in the cabinet inside the head after a day of sailing o...)
 
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
 
==Adjustable Cabinet Fiddles==
 
==Adjustable Cabinet Fiddles==
  
'''by Mark Elkin, ''Yorkshire Rose'' #133'''
+
'''by Mark Elkin, ''[[Yorkshire Rose]]'' #133'''
  
 
----
 
----
Line 8: Line 8:
 
The 1/2" x 1/2" notched pieces will interlock.  After measuring and cutting pieces to the approximate size for their location, I glued each 1/2" x 1" flat piece edge-to-edge with the appropirate notched piece to give some "height" to the fiddles when completed.  Then it was just a simple matter to install in the cabinet and adjust once the "stuff" was loaded back in.
 
The 1/2" x 1/2" notched pieces will interlock.  After measuring and cutting pieces to the approximate size for their location, I glued each 1/2" x 1" flat piece edge-to-edge with the appropirate notched piece to give some "height" to the fiddles when completed.  Then it was just a simple matter to install in the cabinet and adjust once the "stuff" was loaded back in.
  
<gallery caption="(Click on any picture to enlarge)" perrow="4"
+
<gallery caption="(Click on any picture to enlarge)" perrow="4">
 
Image:Head-fiddle1.jpg
 
Image:Head-fiddle1.jpg
 
Image:Head-fiddle2.jpg
 
Image:Head-fiddle2.jpg

Latest revision as of 09:21, 17 October 2011

Adjustable Cabinet Fiddles

by Mark Elkin, Yorkshire Rose #133


I finally got tired of the mixed up mess I'd find in the cabinet inside the head after a day of sailing on the (not always so) Pacific. So I was going to make some fiddles to keep stuff in it's place. But I didn't like the idea of fixed fiddles. While browsing at a Boat/US store, I saw some teak grating pieces but realized these would solve my adjustable fiddles problem.

The 1/2" x 1/2" notched pieces will interlock. After measuring and cutting pieces to the approximate size for their location, I glued each 1/2" x 1" flat piece edge-to-edge with the appropirate notched piece to give some "height" to the fiddles when completed. Then it was just a simple matter to install in the cabinet and adjust once the "stuff" was loaded back in.

While I specifically was looking to solve the "won't stay in place" issue in the head cabinet, this same technique is easily used anywhere you may want adjustable fiddles.