Rudder

General

With the introduction of the Catalina 34 Mark II the rudder was updated to be longer with an elliptical design. Some Mark I owners have updated their original rudders with a new Elliptical Rudder for more control and smoother handling.

Ron Hill has done his own impressive modification to the rudder on his Mark I with a Wing Keel.

• The rudder post goes through a packing gland
  
• Rudder Bearing drawing
  
• Rudder Removal drawing
  

Maintenance

• Packing Gland
  
• Rust Streaks
  
• Factory Repair Methods for Worn Rudder Tube - PDF file
  

Note that I used the resin method, using epoxy resin mixed with graphite (see West Systems website for info on making self-lubricating bearing surfaces.) But instead of pouring resin down the tube, I used the West caulking gun tubes, injecting the mix thru several holes drilled into the backside of the rudder tube. - KWKloeber 4/2015

Steering

• Below-deck Autopilot Considerations

[December 2018] The following links no longer work because Edson modified their own website negating the links. If you need Edson information, visit www.edsonmarine.com

• Edson Planning, Installation and Maintenance Guide (Cable & Wire Steering) PDF file
  
• Edson Marine Steeering Inspection PDF file
  
• Edson Pedestal Engine Control Installation PDF file
  
• Edson Steering Cable components PDF file
  
• Edson Steering Cable components PDF file
  
• Edson Pedestal Shaft Wheel Attachment
  
• Edson Marine Tech Support -Clicking this link takes you to the Edson site
  

Also of Interest

There are several articles of interest concerning Rudders in the Tech Notes

• Richie Compass Compensation