Difference between revisions of "Rudder"
Kloebereng (talk | contribs) |
|||
| (15 intermediate revisions by 5 users not shown) | |||
| Line 9: | Line 9: | ||
==Maintenance== | ==Maintenance== | ||
| + | *[[Packing Gland]]<br> | ||
| + | *[[Rust Streaks]]<br> | ||
| + | *[[Media:CTY_worn_rudder_tube_repair.pdf|Factory Repair Methods for Worn Rudder Tube - PDF file]]<br> | ||
| − | + | Note that I used the resin method, using epoxy resin mixed with graphite (see West Systems website for info on making self-lubricating bearing surfaces.) But instead of pouring resin down the tube, I used the West caulking gun tubes, injecting the mix thru several holes drilled into the backside of the rudder tube. | |
| − | + | - KWKloeber 4/2015 | |
| − | |||
==Steering== | ==Steering== | ||
| + | *[[Below-deck Autopilot Considerations]] | ||
| − | [ | + | [December 2018] The following links no longer work because Edson modified their own website negating the links. If you need Edson information, visit www.edsonmarine.com |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | *[[Media:EdsonMaintennanceGuide.pdf|Edson Planning, Installation and Maintenance Guide (Cable & Wire Steering) PDF file]]<br> | ||
| + | *[[Media:SteeringInspection.pdf|Edson Marine Steeering Inspection PDF file]]<br> | ||
| + | *[[Media:EngineControl.pdf|Edson Pedestal Engine Control Installation PDF file]]<br> | ||
| + | *[[Media:SteeringCable.pdf|Edson Steering Cable components PDF file]]<br> | ||
| + | *[[Media:SteeringCable.pdf|Edson Steering Cable components PDF file]]<br> | ||
| + | *[[Edson Pedestal Shaft Wheel Attachment]]<br> | ||
| + | *[http://www.edsonmarine.com/support/techsupport.php Edson Marine Tech Support] <font color="green">-Clicking this link takes you to the Edson site</font color><br> | ||
==Also of Interest== | ==Also of Interest== | ||
| + | There are several articles of interest concerning Rudders in the [http://c34.org/tech-notes-index/index.htm Tech Notes] | ||
| − | + | *[[Richie Compass Compensation]] | |
Latest revision as of 23:31, 14 August 2020
General
With the introduction of the Catalina 34 Mark II the rudder was updated to be longer with an elliptical design. Some Mark I owners have updated their original rudders with a new Elliptical Rudder for more control and smoother handling.
Ron Hill has done his own impressive modification to the rudder on his Mark I with a Wing Keel.
- The rudder post goes through a packing gland
- Rudder Bearing drawing
- Rudder Removal drawing
Maintenance
Note that I used the resin method, using epoxy resin mixed with graphite (see West Systems website for info on making self-lubricating bearing surfaces.) But instead of pouring resin down the tube, I used the West caulking gun tubes, injecting the mix thru several holes drilled into the backside of the rudder tube. - KWKloeber 4/2015
Steering
[December 2018] The following links no longer work because Edson modified their own website negating the links. If you need Edson information, visit www.edsonmarine.com
- Edson Planning, Installation and Maintenance Guide (Cable & Wire Steering) PDF file
- Edson Marine Steeering Inspection PDF file
- Edson Pedestal Engine Control Installation PDF file
- Edson Steering Cable components PDF file
- Edson Steering Cable components PDF file
- Edson Pedestal Shaft Wheel Attachment
- Edson Marine Tech Support -Clicking this link takes you to the Edson site
Also of Interest
There are several articles of interest concerning Rudders in the Tech Notes
