Difference between revisions of "DIY Refinishing - Before & After photos"
Jump to navigation
Jump to search
(New page: ==Sole Refinishing== ''' By Bob Kuba, ''Quiet Island'' #1291 (1994)''' ====Refinishing==== This sole was refinished with a power orbital sander, and a progression of 100 grit, 150 grit...) |
Mark Elkin (talk | contribs) |
||
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
==Sole Refinishing== | ==Sole Refinishing== | ||
− | ''' By Bob Kuba, ''Quiet Island'' #1291 (1994)''' | + | ''' By Bob Kuba, ''[[Quiet Island]]'' #1291 (1994)''' |
Line 7: | Line 7: | ||
This sole was refinished with a power orbital sander, and a progression of 100 grit, 150 grit, and 220 grit sandpaper. The sole was deeply scratched and worn both underneath the table and the nav station. I had my doubts as to whether or not I could sand down to the depth of the scratches without going through the teak and holly veneer. They looked terrible the way they were and I felt I had nothing to lose so I started sanding. | This sole was refinished with a power orbital sander, and a progression of 100 grit, 150 grit, and 220 grit sandpaper. The sole was deeply scratched and worn both underneath the table and the nav station. I had my doubts as to whether or not I could sand down to the depth of the scratches without going through the teak and holly veneer. They looked terrible the way they were and I felt I had nothing to lose so I started sanding. | ||
− | They cleaned up better than I thought was possible, given the depth of the scratches. After 3 coats of a marine spar varnish, they looked pretty good. These "after" photos were taken 7 years after I refinished the sole. They have held up well. | + | They cleaned up better than I thought was possible, given the depth of the scratches. After 3 coats of a marine spar varnish, and 1 coat on the backside, they looked pretty good. These "after" photos were taken 7 years after I refinished the sole. They have held up well. |
<br><br> | <br><br> |
Latest revision as of 03:38, 21 October 2011
Sole Refinishing
By Bob Kuba, Quiet Island #1291 (1994)
Refinishing
This sole was refinished with a power orbital sander, and a progression of 100 grit, 150 grit, and 220 grit sandpaper. The sole was deeply scratched and worn both underneath the table and the nav station. I had my doubts as to whether or not I could sand down to the depth of the scratches without going through the teak and holly veneer. They looked terrible the way they were and I felt I had nothing to lose so I started sanding.
They cleaned up better than I thought was possible, given the depth of the scratches. After 3 coats of a marine spar varnish, and 1 coat on the backside, they looked pretty good. These "after" photos were taken 7 years after I refinished the sole. They have held up well.