Difference between revisions of "Dish & Cup Rack"
Jump to navigation
Jump to search
Mark Elkin (talk | contribs) |
|||
| (3 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | '''by Craig Illman, ''Espresso'' #1150''' | + | '''by Craig Illman, ''[[Espresso]]'' #1150''' |
---- | ---- | ||
| Line 8: | Line 8: | ||
While it doesn't appear that AFI makes this exact model anymore, they have others that are similar and possibly could be combined. | While it doesn't appear that AFI makes this exact model anymore, they have others that are similar and possibly could be combined. | ||
| − | [[Image:DishCupRack1.jpg| | + | [[Image:DishCupRack1.jpg|450px]] [[Image:DishCupRack2.jpg|450px]] |
| + | |||
| + | [[Image:DishCupRack3.jpg|300px]] [[Image:DishCupRack4.jpg|300px]] [[Image:DishCupRack5.jpg|300px]] | ||
Latest revision as of 08:02, 19 October 2011
by Craig Illman, Espresso #1150
This rack was installed in the galley by a previous owner. It takes very little customization because it uses a rack made by AFI, a division of Marinco. http://www.marinco.com/productline/exterior-teak
It attaches to the bulkhead between the galley and salon on the starboard side and is supported by a 1"x1" square teak pole on the port side that is curved on the bottom to match the fiddle and boxed at the cabintop.
While it doesn't appear that AFI makes this exact model anymore, they have others that are similar and possibly could be combined.
