Join the C34 Association Today!
[C34 Home] [C34Tech Notes] [C34 Tech Wiki] [Join!]
Please login or register.
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: Deck seam over hatch  (Read 1448 times)

0 Members and 1 Guest are viewing this topic.

Ken Kline

  • Guest
Deck seam over hatch
« on: July 17, 2003, 08:27:06 AM »

On my 34, on the starboard side, toward the bow, the corner of the deck seam above the entry-way hatch is 1/8th to 1/4 inch lower than the deck, despite several different types of caulk I've used.  Is this a problem? Any recommendations?
Logged

Ken Kline

  • Guest
Deck seam over hatch
« Reply #1 on: July 18, 2003, 06:00:47 AM »

My boat is hull #1505 (model year 2000) and there is a portion of the deck that runs from the entry-way to forward of the traveler, which, forward of the traveler, covers the sliding entry-way hatch. It's attached with several screws, appears to be removable, and there is a caulked seam that surrounds it where it aligns and meets with the rest of the deck. In my case, forward of the traveler, on the starboard side, next to that caulked seam, there is a section about 1-foot long that is about 1/8th - 1/4 inch below the "permanent" deck next to it, as if that section of this removable piece has settled. If this is more clear, any advice about this would be greatly appreciated--is it a problem and if so how to repair it?
Logged
Pages: [1]   Go Up