Print

Please login or register.

[DarthOccam]

For free:  practically new innerspring split mattress for C34 aft berth.  These came standard on our 2005 Mk II.  The original owner did not use the aft cabin and we've stored them in plastic in a closet/garage since we purchased the boat in 2010. 

I no longer have the ability to store them, and am not going to get a storage room just for the mattress, so looking for a good home.  Includes a set of never used fitted sheets.

If you are interested, let me know ASAP.  I'm moving on 4/30 and will have to toss them if no one wants them.

Located in Thousand Oaks, CA.  Too big to ship, but close to the LA, Ventura, and Santa Barbara harbors.

[Freedom]

I have a 1993 C34 MK1.5, do you know if the measurements of you mattress would work for my boat. Im sure I would sleep a lot better than I do on my original cushions with a memory foam mattress on top.


Thanks,

Dave
S/V Freedom
#1267
San Diego CA

[DarthOccam]

Dave,

I haven't been on a MK1.5 boat, but I would think they are comparable in size.  I measured the mattress this morning.  Since the shape is a little complicated, I diagrammed it out below. 

The mattress is about 6.5" thick.  It comes in two sections, with the seam running down the centerline.  The black numbers represent the size of the mattress on top.  The grey lines/numbers represent the size of the mattress on the bottom, as the starboard edge is angled to follow the curve of the hull.

Let me know if you have any questions...

Regards,

Michael

[Freedom]

Michael,

Great, I will get down to the boat as soon as I can to take some measurements. Obviously don't hold onto the mattress if you get some offers, but If you still have it once I can confirm the measurements I would like to buy it.


Thanks,

Dave

[DarthOccam]

Unfortunately, it looks like the mattress does not fit a MK 1/1.5 boat.  Still available through 4/30.

[bayates]

Are they still available. I have a 2000 and will arrange to get them.

Brian

[DarthOccam]

Brian,

Yes, they are still available.  I will send you a pm with contacts info.

Michael

[DarthOccam]

Brian,

Don't know if the PM I sent got through.  You can reach me by voice/text at (805) 795-8266.

Regards,

Michael