Bilge pump intermittent operation

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

cmnq323

Sorry if duplicate topic....

1988 C34, bilge pump float switch was just replaced, yet, will not consistently turn on the pump.
All wires tested as hot. Anyone have a bilge pump wiring diagram or thoughts?

We are taking on water from the keel bolt area, they were also recently tightened.....




KWKloeber

Stray Cat,

Are you saying the pump doesn't pump water, or that the pump isn't energized at all (due to the switch or whatever not putting power to the pump.)


Ken
Twenty years from now you'll be more disappointed by the things you didn't do, than by the ones you did.
So throw off the bowlines.  Sail away from the safe harbor.  Catch the tradewinds in your sails.
Explore.  Dream.  Discover.   -Mark Twain

Stu Jackson

Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."

cmnq323

Thank you, temporarily fixed it before work this morning!

kwaltersmi

Any oil/diesel in the bilge?  Some pumps cut out if oil is detected.
'87 C34 TR/WK M25XPB
SailFarLiveFree

cmnq323

Well, the temporary fix did not work....we finally gave in and replaced the bilge pump and found a short in the wiring to the pump itself.  So that issue is now resolved.
HOWEVER, during this wiring map session we've discovered another short in the wiring to the AC system.  Additionally battery 1 (starting battery) needs replacing...