Galley Sink drain assembly with plastic elbow flix

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Footloose

Noah,

As I stated in my post they would not fit in my boat.  It was close, but the drawer would not go in all the way.  I don't know if the position of the drawer is constant from boat to boat, but the water heater is below it so it can't be much lower.  I considered trying to trim the fittings to make it work but ended up with the bar drain.  Yes, I also have many fittings to get down to the thru hull.
Dave G.
"Footloose"
Hull# 608  1988 Tall Rig/Fin Keel
Malletts Bay, VT- Lake Champlain

Noah

Speaking of the water heater... The hoses that come off the back of the heater are making things very tight to access/connect any drain hose to the thru-hull. Add to that, a poorly placed pedestal/shelf for my fresh water pressure pump, foot pump for ice box and Y-valve "manifold" for water tanks  (P.O. Installed) --makes it a laying on my back, knuckle busting pain festival....  I know "we've all been there and quit complaining..." :cry4` :shock: 8)
1990 hull #1014, San Diego, CA,  Fin Keel,
Standard Rig