Calibrating the knot meter?

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Steve_in_lex

I have a factory-installed set of Raymarine instruments, ca. 2005.  Th knot meter seems to be running fast, in that I've compared it to a GPS under all kinds and directions of current, including none.  Do you know if it's possible to re-calibrate it?
Steve Saudek
2005 C-34 MK II
#1701
"Brisa"

TonyP

Steve ...   Google it.

I know we can with our 2012 60's. Ours runs slower by a knot and a half or more.
Although we haven't bothered to as a gps is accurate for us.
We do have a measured nautical mile marked on the shore where we sail.
You need to time runs in both directions to work out actual speed over the distance.
I read it in our instruction manual.
Hope this helps though yours is an earlier model.

good luck

Tony
Tony Plunkett
C34 Moonshadow
1992  Hull#1174
Pittwater / Newport
NSW Australia

Clay Greene

You also should be able to calibrate it by setting it to the speed over ground number from the chart plotter if you have the instruments and the chart plotter networked together through SeaTalk (if all Raymarine) or NMEA 0183.
1989, Hull #873, "Serendipity," M25XP, Milwaukee, Wisconsin

Steve_in_lex

Thanks, Tony and Clay.  Today I found the user manual online and it looks like it shouldn't be too hard to do.

Steve
Steve Saudek
2005 C-34 MK II
#1701
"Brisa"