Fuel pump done?

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Franky

#15
I have finished changing out the VCG and the timing belt along with the tensioner. Everything was working great then my feul pump seemed to go bad. I am not gettting any fuel to the engine and so I am trying to check the relay but I can not find it. Does anyone know were it is located. Thanks
-------------------------
review this heating install

Stu Jackson

M25XP?  There is no relay.  The pump goes on when the ignition switch is turned on.

Check the wiring, I've found the ground wire at a butt connector disconnected on one boat I worked on, underneath the head sink on the way to the fuel tank.
Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."

Ron Hill

Franky : If you look at the (-) ground wire, I also installed another gnd wire to the screw down brack for a double gnd by joining them together.    A thought
Ron, Apache #788