Join the C34 Association Today!
[C34 Home] [C34Tech Notes] [C34 Tech Wiki] [Join!]
Please login or register.
Advanced search  


Pages: [1]   Go Down

Author Topic: Bow Pulpit replacement  (Read 1793 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
Bow Pulpit replacement
« on: December 27, 2001, 10:58:13 AM »

I seem to remember back a couple of years that there was a thread about replacing the bow pulpit. After a run in with an unforgiving concrete dock I am going to have to pelace mine. I have an 1986 #27 and the yard called Catalina and was not able to any leads on locating one. Does anyone know of a salvage yard or somewhere to look.We are in the Tampa/St. Pete area, but can go anywhere. The yard is planning on fabricating a new one and I think there has to be a better way.
 On a second note, due to space restrictions the yard is going to put the boat on the hard for the repair. I had the bottom done, blisters repaired,and etc. about 9 months ago. I wondered if there were any suggeations on anything the should be done while she is out of the water.
 Thanks in advance


  • Guest
Bow Pulpit
« Reply #1 on: December 27, 2001, 08:35:07 PM »

'87, Hull 290
 Earlier this year I whacked mine and whined about it here in a post or two. Catalina had them available for about $350 and it was available almost immediately.
 Shipping this sucker can almost be as expensive as the part itself!


  • Guest
Bow Pulpit Replacement
« Reply #2 on: December 28, 2001, 05:29:43 AM »

Before you replace, think about having it repaired. A few years ago I had a run-in with a dock and bent my pulpit. Here near Detroit we have a SS fabricator who cut out the damaged sections, replaced them, polished the whole thing so it looked better then new and charged less then $150. An extra bonus was that all the original mounting holes still lined up, so reinstallation was a snap.
 It's worth a try before you replace.
 Steve Selinger
 Aquila Hull #1047
 Steve Selinger
 Aquila #1047


  • Guest
Bow Pulpit replacement
« Reply #3 on: December 31, 2001, 08:54:46 PM »

Try  They claim to have what you are looking for.
Pages: [1]   Go Up