stripe at waterline

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Tom Glennon

Gentlemen:  Last Fall, when the boat was hauled and powerwashed, I was not present, and the person wielding the washer took some of the waterline paint on the aft port side of the boat.  As it was not too accommodating this past spring weather-wise, I decided to launch as is, and deal with the issue this haul-out.   
My hull is a light cream color, with dark blue waterline stripe.  Have any of you folks dealt with a similar situation?  The rest of the stripe is in wonderful condition.... I'd just hate to tape off an area, repaint it, and have it stick out like the proverbial sore thumb.  Slow Dance is otherwise a very attractive vessel.
Tom Glennon, Slow Dance #354, 1987, Buzzards Bay, Massachusetts

Stu Jackson

Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."

Tom Glennon

Thanks for the link Stu.... I like the idea of the one-part Urethane... just tape, and paint the whole thing.
Tom Glennon, Slow Dance #354, 1987, Buzzards Bay, Massachusetts