Steering Quadrant for MkII Boats

[George Bean]

Does anyone know the correct Edson part number and size for the Radial Drive Wheel (quadrant) used on the Mk II boats?  One of my many projects is to install a rudder sensor and I need to know the correct geometry.  My plan so far is to use the extra two threaded bolt holes to mount a cover plate that will have the ball socket that will connect to the sensor via a rod.  I'm mounting the sensor itself to the underside of the deck on the Stb. Side of the rudder post.  With the transverse mounted water tank and all the other wires and cables, there isn't much room to work but my preliminary survey indicates that it should work with a little modification.

[Jeff_McKinney]

George,

As others might say: Perhaps you could give your dealer or Catalina (818-884-7700) a call? Be sure to mention your hull number in case they changed the vendoe of the part.

[Stu Jackson]

George

Try www.edsonmarine.com

[Ron Hill]

George : You can go on line, but got a hunch you're going to want to talk to somebody.  Your's is not the first time this question has been asked. 
Talk to Will Keen @ (508)995-9711 - he'll help you!!