Join the C34 Association Today!
[C34 Home] [C34Tech Notes] [C34 Tech Wiki] [Join!]
Please login or register.
Advanced search  


Pages: [1]   Go Down

Author Topic: Vedor for bow and stern pulpits  (Read 2359 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
Vedor for bow and stern pulpits
« on: June 02, 2001, 05:15:44 PM »

Fellow boaters:
 I am new to this BB so forgive me if this information is in the archives somewhere.
 Yesterday I was on a race and one of the competitors tried to help me by hitting me in the port quarterpanel and removing a portion of my stern pulpit for me. Although the fiberglass damage was minor, the stern pulpit is mangled. Since the lifelines were attached to the bow pulpit, it was also pulled back a foot or so, and broke several of the welds. Bottom line: I need to purchase a new set of pulpits, both bow and stern. Does anyone know of a vendor in the Seattle, Washinton area, or is there a way I can order them through Catalina? My boat is hull #3, built in 1986.
 Tom Madden


  • Guest
Vendor for bow and stern pulpits
« Reply #1 on: June 03, 2001, 08:36:05 AM »

Catalina has a bow pulpit for my '87 so chances are good you can just call Catalina parts. Have Visa handy...

Stu Jackson

  • C34IA - Secretary
  • Forum - Master Chief Petty Officer of the Navy
  • ********
  • Karma: 68
  • Posts: 7552
    • View Profile
« Reply #2 on: June 03, 2001, 11:09:43 AM »

I local friend recently had the same problem, and used a local metal fabrication shop.  He was pleased with the results and it was somewhat less expensive.  Shop around.
Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."


  • Guest
« Reply #3 on: June 04, 2001, 05:08:08 AM »

Look at the website:  They seem to have a generous supply of Catalina components.


  • Guest
« Reply #4 on: June 04, 2001, 09:00:04 AM »

Yeah, but did you win the race?
 Rumours of my Death Persist

dave davis

  • C34IA - Past Commodore
  • Forum - Petty Officer 2nd Class
  • ****
  • Karma: 1
  • Posts: 102
    • View Profile
bow pulpit
« Reply #5 on: June 04, 2001, 06:20:04 PM »

The problem you might have with a ready made job is that the mounting holes and flange way not line up. If you get a local one made you have a better chance that you can use the same holes. I notice that there are several adds in 48 North Good luck... :rolleyes:
Dave Davis San Francisco, 707, Wind Dragon, 1988, South Beach
Pages: [1]   Go Up