Print

Please login or register.

[britinusa]

I'm refinishing the interior of Eximius, just done the Galley Drawer Cabinet, turned out really nice.
Next project is the Door on the front of the hanging locker ( just aft of the Nav Table )

But how to refinish the slats?

The Galley Drawer Cabinet was pretty easy, just sand it down to remove 36 years of previous finishes and then apply 3 coats of Water Based Polyurethane.
But sanding those slats, that's a challenge, anyone done it or knows how?

Thanks.
Paul

[Craig Illman]

I stripped them with a heat gun, then sanded.

Craig

[britinusa]

Thanks Craig. I have a heat gun :)

Here's how the galley drawer cabinet turned out.

The cutlery drawer is next, then the slatted door.