Sliding doors

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Holger Dieske

in the saloon there are these 3 sliding doors on each side (above the sofas), which in my case are made of wood. I want to paint them and I don't know how to get them out. Does anyone have advice for me?
I am from Germany and I use Google-Translator! (and a little bit my brian ;) )

C34 "RUNAWAY" Mark 1.5 - 1992 WK - Hull Nr. 1219 - Yanmar3GM30F - Flag: German - Boat stay in Mediterranean Sea.

csimmerling

For me they come out if you lift up until the bottom comes out of the slot, then pull the bottom forward.
"Natterling", #148 1986 mk 1 fin keel std rig, Port Jefferson, NY

Noah

You may have to pry/push up on the upper track a bit to get enough height to lift out the doors.  Thing may have sagged a bit.
1990 hull #1014, San Diego, CA,  Fin Keel,
Standard Rig

Ron Hill

Hogler : If there was anything heavy stored in the open shelf above your sliders, you'll have to do a Noah suggests.

A thought
Ron, Apache #788

Holger Dieske

I am from Germany and I use Google-Translator! (and a little bit my brian ;) )

C34 "RUNAWAY" Mark 1.5 - 1992 WK - Hull Nr. 1219 - Yanmar3GM30F - Flag: German - Boat stay in Mediterranean Sea.