Join the C34 Association Today!
[C34 Home] [C34Tech Notes] [C34 Tech Wiki] [Join!]
Please login or register.
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: Transmission Replacement  (Read 116 times)

0 Members and 1 Guest are viewing this topic.

Junpu

  • Forum - Seaman Apprentice
  • *
  • Karma: 0
  • Posts: 2
    • View Profile
Transmission Replacement
« on: September 10, 2021, 10:47:36 PM »

I need to replace the Hurth HB50 transmission on my ’86 Catalina 34 Mk I. Catalina Direct offers a ZF 12M transmission and calls it a “very close replacement” to the Hurth HB50. The ZF transmission is slightly larger than the Hurth. It’s 37mm longer and requires the engine to be raised 10mm. Raising the engine 10mm won’t be a problem, but I’m concerned about the addition length. Although Catalina Direct won’t guarantee that the ZF will fit my C34, they said that it “should” fit.

Has anyone replaced an original Hurth HB50 transmission with a ZF 12M on a Catalina 34? Also, I’ve heard the PRM 60 transmission is another “drop in” possibility for the Catalina 34. Any thoughts?
« Last Edit: September 10, 2021, 10:48:42 PM by Junpu »
Logged

KWKloeber

  • Forum - Master Chief Petty Officer of the Navy
  • ********
  • Karma: 35
  • Posts: 4229
  • "Positive Impact" 1984 C-30 mk-I #3573 trbsfk M-25
    • View Profile
Re: Transmission Replacement
« Reply #1 on: September 10, 2021, 11:36:10 PM »

@J

I don’t know which engine you have, but this thread discusses both the ZF and PRM.
Note the explanation how a new shift bracket is needed.

https://groups.io/g/Catalina30/topic/81005942?p=,,,50,0,0,0::Created,,Transmission,50,2,0,81005942
Logged
Twenty years from now you'll be more disappointed by the things you didn't do, than by the ones you did.
So throw off the bowlines.  Sail away from the safe harbor.  Catch the tradewinds in your sails.
Explore.  Dream.  Discover.   -Mark Twain

Ron Hill

  • Forum - Master Chief Petty Officer of the Navy
  • ********
  • Karma: 61
  • Posts: 7755
    • View Profile
Re: Transmission Replacement
« Reply #2 on: September 11, 2021, 11:26:32 AM »

Jun: I replaced my old Hurth 50 with a Hurth 100 .  I believe that the ZF 12 and the Hurth 100 have the same outside case. 
I believe that I cut about 1.5" to shorten the shaft.  But then I had a Vetus flex coupling so the keyway loss made no difference.

Hope this helps   A few thoughts

Logged
Ron, Apache #788
Pages: [1]   Go Up