Leaky fuel injector M25

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Catalina007

I have leaky injector
I read a few of the threads  but they were old and suggested a new post rather than reply.
I need to tighten and/or replace crush washers on a leaky injector
I see references to two crush washers (#4 and #6 on attached diagram)
An aluminum one near the banjo and a copper one at the bottom of the injector.   
But I could only find one part number  Kubota 17011-53620

Ron Hill

007 :Where is the leak on the injector? That will determine which washer you need!!

A thought
Ron, Apache #788

KWKloeber

Ron

The bottom crush washer (saw the leak.)

-k
Twenty years from now you'll be more disappointed by the things you didn't do, than by the ones you did.
So throw off the bowlines.  Sail away from the safe harbor.  Catch the tradewinds in your sails.
Explore.  Dream.  Discover.   -Mark Twain

Ron Hill

007 : You have to be VERY careful to make sure that when you reinstall an injector that you make sure that any "junk" in the injector well doesn't get on the washer seat on the cylinder head!!

Go to a diesel injector shop (truck diesel engine repair) and they can get you the spare washers you need.

A few thoughts
Ron, Apache #788