M-25XP running hot + white smoke

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Stu Jackson

Quote from: waughoo on June 11, 2021, 08:47:53 PM
I'll look into that.  The o-ring is working but the bowl and flange dont have any sort of recess to hold the oring.  The idea of a square rubber ring is likely to be the correct part.

Alex, have you considered taking the cover with you to a good local hardware store that has a selection of O rings?  Or is that where you got this one?
Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."

Ron Hill

Guys : The square "O" ring gasket is the correct part.  When I ordered the finer mesh screen I got a couple of new gaskets (less than $1 each) and keep them nimble with silicone spray.

A thought
Ron, Apache #788

waughoo

Quote from: Stu Jackson]

Alex, have you considered taking the cover with you to a good local hardware store that has a selection of O rings?  Or is that where you got this one?

I got a sherwood raw water strainer gasket (oring) at Fiaheries.  It was the correct diameter however it is round rather than square.
Alex - Seattle, WA
91 mk1.5 #1120
Std rig w/wing keel
Universal M35
Belafonte