Valve adjusting m25xp

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

glennd3

I just adjusted the valves on my m25xp. All the info is on this site. Job was easy and straight forward. 10 mm wrench for lock nuts, 12 mm wrench for valve cover nuts, feeler gauge and I turned the engine by turning alternator. The valves were all a little loose. I also replaces the valve cover seal because it was leaking a little in the back and I did not know it's age. I was also happy with the appearance of the valve train, clean and not worn from what I could see. 2500 hours
Glenn Davis
Knot Yet
1990 Catalina 34 Mk 1.5
Hull 1053
TR/WK
M25XP
Patapsco River
Chesapeake Bay Maryland

Ron Hill

Glenn : Good for you, an easily done task on the M25X, because the markings are on the flywheel!!

A thought
Ron, Apache #788