Mystery fluid in bilge

Previous topic - Next topic

0 Members and 8 Guests are viewing this topic.

KWKloeber

Quote from: waughoo on July 31, 2024, 08:51:53 AMThe above also doesn't work if you heat up the water tank.  The expansion of the hot water will also increase pressure.  As the tank cools, it will reduce the pressure and thus when the water pump is switched back on, it will run to replace the missing pressure.

Alex

As with everything boating, I'd say, "It depends."

The pressure switch is on the cold water pump not on the hot water supply side of the system.

So, if the csupply to the WH tank is X psi (same as in the cold water side) and the hot water pressure is X+temp_rise psi, the pressure pump sensor doesn't see that increase - it only knows whats on the cold water side of the equation.

So likewise if the WH tank cools down and the temp is anything above the temp of the cold water supply to it, then the pressure pump doesn't see the pressure decrease in the WH tank.  There's no reason I see that the WH would cool down below the cold side, so the WH should always be at or higher than the psi in the cold side.

At least that's my theory of how it *should* work overnight. Correct my thinking if it's flawed!

The "it depends" being that the checkvalve on the cold water supply hose to the WH tank is not leaking.
Twenty years from now you'll be more disappointed by the things you didn't do, than by the ones you did.
So throw off the bowlines.  Sail away from the safe harbor.  Catch the tradewinds in your sails.
Explore.  Dream.  Discover.   -Mark Twain

Ron Hill

#16
Guys : I NEVER turn OFF the water pressure switch and I've NEVER heard the pump kick in when I turn on the battery selector switch ON!! That's over MANY years!!    :D

A thought
Ron, Apache #788

Jim Hardesty

Quote from: Ron Hill on August 16, 2024, 01:58:43 PMGuys : I NEVER turn OFF the water pressure switch and I've NEVER heard the pump kick in when I turn on the battery selector switch!! That's over MANY years!!    :D

A thought

Neither do I.  Unless there's a leak.
Jim
Jim Hardesty
2001 MKII hull #1570 M35BC  "Shamrock"
sailing Lake Erie
from Commodore Perry Yacht Club
Erie, PA

robbjd

Different strokes for different boats! Our battery switch used to always stay on due to its solar wiring. Two days before we took possession of our boat the previous owner had graciously washed down the boat with its washdown system which draws from the water in which it floats.

He hadn't switched the pump off and didn't shut the cockpit shower taps off tightly enough before storing the shower head in its compartment. After driving 4 hours to move into our beautiful boat we opened the companionway to see the boards above the bilge floating, and the bilge pump almost keeping up.
The solar isn't wired that way now but I always shut off all switches, except the bilge pump three way which is always powered.
S/V Mystic
1997, C34 MKII, STD rig, Fin keel
Universal M35-A(C)
Hull #1344
Sarnia, ON, Canada

KeelsonGraham

Quote from: robbjd on August 16, 2024, 06:59:22 PMI always shut off all switches, except the bilge pump three way which is always powered.

Me too, just in case.
2006 Catalina 34 Mk II. Hull No:1752. Engine: M35 BC.

Stu Jackson

Quote from: Ron Hill on August 16, 2024, 01:58:43 PMGuys : I NEVER turn OFF the water pressure switch and I've NEVER heard the pump kick in when I turn on the battery selector switch ON!! That's over MANY years!!    :D

A thought

I got into the habits of:

1.  Using the hot water faucet even when there isn't any hot water because it keeps moving water through the heater

2.  Turning off the water pressure switch AND opening the hot faucet to relieve pressure in the system.  My "logic" is - why keep the system (hoses and clamps) under pressure when not necessary. 

Some years ago I had that dreaded "pump burps every minute or so" sound.  I traced it to a cracked hose way back under the engine where the hoses ran to the head sink.  I spent a few days replacing all the hoses and clamps.
Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."