Messages

I saw in the tech note of october 2010 a chart for the tension of the rigging. Is it good for all the c34. I have a c34 mk11 1997 and each winter i give a couple turn of slack on my shrouds. In the chart i see Catalina 34 mk11 Trident Rig Tuning. What's the signification of Trident. I want to be sure before to use this chart this summer. Thank you.

Thank you for all  of your information.

Hi this fall when i installed my boom vang the boomis gone up between 35 and 45 degres and it is very hard to pull down. Is it normal and is there an ajustment on the spring inside. Thank you.

Thank you Jack i will check for the bracket immediatly when i will go on my boat. We are in the snow for now.

Thank you Ken for the picture and now what' the knurled knob? I don't speak English very much and there are some what i don'T know. Thank you

i saw on many topic when you change the filter near the motor that's important to open the bleed valve. It's my first boat and my first time to do that. Where is situate this valve, i don't want to make a error and i want to learn how to do that. My boat is a c34 1997 with a m35bc for motor. Thank for your help.

Hi Ron on my boat i have a racor with a filter R15s before my pump, i don't know if it's the good model for my motor. I want to change the filter. Also i saw in my book ther are two model of fuel lift pump. One is round with a small filter inside and the other like of mine is square and no filter inside. Is it the filter what you talking about 80 micron. Thank you.

I am a Monty bay in the lake Champlain New york state.

Thank you very much

I bought a C34 1997 and there is a maxwell 500 but is it just for the rope. I bought a 100 feet of chain and i want to change the piece ( i don't know the name in english) for working with my chain. Is it possible? Thank you.

Good morning, i recently bought a c34 and it's my first sailboat. I want to know what is the signification of the letter B and C on my motor. Also i have a small electric fuel lift pump square and i am not sure if there is a filter inside like a round pump what i see. My pump make 3or 4 clic per second, Is it normal. I begin with this question for now. Excuse my English is not very good but i'am learning.